Digital BW, The Print

>For those of us, who have been Piezographers so far and have
>saved  their images for straight piezo prints  - and now want to
>print  MIS Full Spectrum Inks through the Cone Driver and have
>saved  their images for straight piezo prints ....  (puuuh) .... I have
>worked out  a curve which should bring identicall prints with the
>MIS FS inks - at least on an 1160.
>I calibrated with my eyeballs printing the 21 step image and
>checked it with my print exchange picture, which I printed with
>both inks innert 5 minutes on two 1160s.
>(Result: can´t tell the 21 steps prints and the two images apart.)

Bernd -

Does this mean that you are successfully using the MIS Full Spectrum inks
to export images through the Piezography BW driver? If so, are you
encountering any problems (nozzle clogging, etc.)? As you know if you've
been following the long exchange here, I am not entirely happy with MIS
Variable Mix but I dislike the very warm tone of the usual Piezo inks.

Thanks for the valuable information.

-- Nick

NICHOLAS HARTMANN                                +1 (414) 271-4890
611 N. Broadway, Suite 509                  fax: +1 (414) 271-4892
Milwaukee, WI 53202, USA                       polyglot@...

Technical and scientific translator:  German and French -> English