Paul Watercolor paper is sold in blocks for the convenience of being able to paint on the surface without removing it to keep the paper flat. A dull butter knife is best for separating the sheets. The edges should be trimmed before printing, the rough edge can rub on the print heads as it exits the printer causing a a streak at the edge of the paper as it leaves the printer ( can't do the heads any good either), It does this on my 1400. It should be noted that some manufacturers put right sides together. Arches doesn't. Also the glue used to bind the paper penetrates very slightly into the edges and can effect borderless prints along with causing the paper to curl. Nope this helps Kelly
Message
Re: Arches watercolor block paper
2012-05-04 by Kelly Healy
Attachments
- No local attachments were found for this message.