Yahoo Groups archive

Korg DW8000, Mono/Poly, MS-20...

Archive for DW8000.

Index last updated: 2026-03-30 01:00 UTC

Thread

greetings DW-8000 USERS..

greetings DW-8000 USERS..

2011-01-01 by Royce

(Sorry I accidentally deleted this message from jamesreno@... - Royce)

I love this synth. I've only had it for about 8 months, but
i'm in love with that filter! One question though.... How
can I program my Bcr2000 MIDI rotary controller to control
the dw's parameters when the DW does not send out midi
parameter data?

Is there a way around this?

Any help would be great!

Re: greetings DW-8000 USERS..

2011-01-01 by Royce

Hi James
sorry about deleting the message.
Post New Year's effect I think.

> I love this synth. I've only had it for about 8 months, but
> i'm in love with that filter! One question though.... How
> can I program my Bcr2000 MIDI rotary controller to control
> the dw's parameters when the DW does not send out midi
> parameter data?
>
> Is there a way around this?

Check out the Yahoo BC2000 group.
I wrote a preset for the DW6000 and a few have written DW8k ones (which are a bit easier, strangely)

All the best

Royce

Re: [DW8000] Re: greetings DW-8000 USERS..

2011-01-01 by James Reeno

Greetings !


Is there a way that the dw can send midi parameter data OUT, so that I can program my MIDI hardware controller to program it from?


 
 

REENO
Funky music For The New Millenium
WWW.SPAZZOID.COM

(Where music still Matters)


On ITunes:

http://itunes.apple.com/us/album/the-real-electrofunk/id354096689

http://itunes.apple.com/us/album/close-encounters-808-kind/id302452252

http://itunes.apple.com/us/album/360-degrees/id312541576

http://itunes.apple.com/us/album/the-acid-jazz-project-vol/id349442979


CD Releases:



From: Royce <rpcfender@...>
To: DW8000@yahoogroups.com
Sent: Fri, December 31, 2010 8:39:29 PM
Subject: [DW8000] Re: greetings DW-8000 USERS..

 

Hi James
sorry about deleting the message.
Post New Year's effect I think.

> I love this synth. I've only had it for about 8 months, but
> i'm in love with that filter! One question though.... How
> can I program my Bcr2000 MIDI rotary controller to control
> the dw's parameters when the DW does not send out midi
> parameter data?
>
> Is there a way around this?

Check out the Yahoo BC2000 group.
I wrote a preset for the DW6000 and a few have written DW8k ones (which are a bit easier, strangely)

All the best

Royce


Re: [DW8000] Re: greetings DW-8000 USERS..

2011-01-01 by joe peak

You can use midiox to view all data being sent out of any midi device.  A good tool to see whats going on...


http://www.midiox.com/


             J.



--- On Fri, 12/31/10, James Reeno <jamesreeno@...> wrote:

From: James Reeno <jamesreeno@...>
Subject: Re: [DW8000] Re: greetings DW-8000 USERS..
To: DW8000@yahoogroups.com
Date: Friday, December 31, 2010, 7:02 PM

 

Greetings !


Is there a way that the dw can send midi parameter data OUT, so that I can program my MIDI hardware controller to program it from?


 
 

REENO
Funky music For The New Millenium
WWW.SPAZZOID.COM

(Where music still Matters)


On ITunes:

http://itunes.apple.com/us/album/the-real-electrofunk/id354096689

http://itunes.apple.com/us/album/close-encounters-808-kind/id302452252

http://itunes.apple.com/us/album/360-degrees/id312541576

http://itunes.apple.com/us/album/the-acid-jazz-project-vol/id349442979


CD Releases:



From: Royce <rpcfender@...>
To: DW8000@yahoogroups.com
Sent: Fri, December 31, 2010 8:39:29 PM
Subject: [DW8000] Re: greetings DW-8000 USERS..

 

Hi James
sorry about deleting the message.
Post New Year's effect I think.

> I love this synth. I've only had it for about 8 months, but
> i'm in love with that filter! One question though.... How
> can I program my Bcr2000 MIDI rotary controller to control
> the dw's parameters when the DW does not send out midi
> parameter data?
>
> Is there a way around this?

Check out the Yahoo BC2000 group.
I wrote a preset for the DW6000 and a few have written DW8k ones (which are a bit easier, strangely)

All the best

Royce



Re: [DW8000] Re: greetings DW-8000 USERS..

2011-01-02 by James Reeno

Thanks for that joe, however the dw does not output it's parameter data.  I tested it.
 

REENO
Funky music For The New Millenium
WWW.SPAZZOID.COM

(Where music still Matters)


From: joe peak <lovgh2000@...>
To: DW8000@yahoogroups.com
Sent: Sat, January 1, 2011 4:13:51 PM
Subject: Re: [DW8000] Re: greetings DW-8000 USERS..

 

You can use midiox to view all data being sent out of any midi device.  A good tool to see whats going on...


http://www.midiox.com/


             J.



--- On Fri, 12/31/10, James Reeno <jamesreeno@...> wrote:

From: James Reeno <jamesreeno@...>
Subject: Re: [DW8000] Re: greetings DW-8000 USERS..
To: DW8000@yahoogroups.com
Date: Friday, December 31, 2010, 7:02 PM



From: Royce <rpcfender@...>
To: DW8000@yahoogroups.com
Sent: Fri, December 31, 2010 8:39:29 PM
Subject: [DW8000] Re: greetings DW-8000 USERS..

 

Hi James
sorry about deleting the message.
Post New Year's effect I think.

> I love this synth. I've only had it for about 8 months, but
> i'm in love with that filter! One question though.... How
> can I program my Bcr2000 MIDI rotary controller to control
> the dw's parameters when the DW does not send out midi
> parameter data?
>
> Is there a way around this?

Check out the Yahoo BC2000 group.
I wrote a preset for the DW6000 and a few have written DW8k ones (which are a bit easier, strangely)

All the best

Royce




Re: greetings DW-8000 USERS..

2011-01-02 by Royce

Hi James

> Is there a way that the dw can send midi parameter data OUT, so that I can
> program my MIDI hardware controller to program it from?

If you are talking about using the LEARN function on the BC2000, then even if the DW would output parameter sysex it is of limited use except for the buttons on the BC2000.

The BC2000 can be much more extensively programmed with an PC editor and you can have the knobs and buttons working the DW in real time (even the sliders if you have a BCF2000).

A lot of this work has already been done for you and it is available for free on the Yahoo BC2000 group.

Re: [DW8000] Re: greetings DW-8000 USERS..

2011-01-03 by James Reeno

Ok...thanks.  How exactly do I join that group?
 

REENO
Funky music For The New Millenium
WWW.SPAZZOID.COM

(Where music still Matters)


From: Royce <rpcfender@...>
To: DW8000@yahoogroups.com
Sent: Sun, January 2, 2011 6:38:13 PM
Subject: [DW8000] Re: greetings DW-8000 USERS..

 

Hi James

> Is there a way that the dw can send midi parameter data OUT, so that I can
> program my MIDI hardware controller to program it from?

If you are talking about using the LEARN function on the BC2000, then even if the DW would output parameter sysex it is of limited use except for the buttons on the BC2000.

The BC2000 can be much more extensively programmed with an PC editor and you can have the knobs and buttons working the DW in real time (even the sliders if you have a BCF2000).

A lot of this work has already been done for you and it is available for free on the Yahoo BC2000 group.


Re: greetings DW-8000 USERS..

2011-01-03 by Royce

Hi James
I see that you have just joined the BC group.

Royce


--- In DW8000@yahoogroups.com, James Reeno <jamesreeno@...> wrote:
>
> Ok...thanks. How exactly do I join that group?
>
> REENO
> Funky music For The New Millenium
> WWW.SPAZZOID.COM
> (Where music still Matters)
>
>
>
> ________________________________
> From: Royce <rpcfender@...>
> To: DW8000@yahoogroups.com
> Sent: Sun, January 2, 2011 6:38:13 PM
> Subject: [DW8000] Re: greetings DW-8000 USERS..
>
>
> Hi James
>
> > Is there a way that the dw can send midi parameter data OUT, so that I can
> > program my MIDI hardware controller to program it from?
>
> If you are talking about using the LEARN function on the BC2000, then even if
> the DW would output parameter sysex it is of limited use except for the buttons
> on the BC2000.
>
> The BC2000 can be much more extensively programmed with an PC editor and you can
> have the knobs and buttons working the DW in real time (even the sliders if you
> have a BCF2000).
>
> A lot of this work has already been done for you and it is available for free on
> the Yahoo BC2000 group.
>

Re: [DW8000] Re: greetings DW-8000 USERS..

2011-01-03 by James Reeno

Yes....thanks.

How do I program my bcr to control my dw-8000?
What is the exact procedure?
 

REENO
Funky music For The New Millenium
WWW.SPAZZOID.COM

(Where music still Matters)





From: Royce <rpcfender@...>
To: DW8000@yahoogroups.com
Sent: Mon, January 3, 2011 1:08:19 AM
Subject: [DW8000] Re: greetings DW-8000 USERS..

 

Hi James
I see that you have just joined the BC group.

Royce

--- In DW8000@yahoogroups.com, James Reeno <jamesreeno@...> wrote:
>
> Ok...thanks. How exactly do I join that group?
>
> REENO
> Funky music For The New Millenium
> WWW.SPAZZOID.COM
> (Where music still Matters)
>
>
>
> ________________________________
> From: Royce <rpcfender@...>
> To: DW8000@yahoogroups.com
> Sent: Sun, January 2, 2011 6:38:13 PM
> Subject: [DW8000] Re: greetings DW-8000 USERS..
>
>
> Hi James
>
> > Is there a way that the dw can send midi parameter data OUT, so that I can
> > program my MIDI hardware controller to program it from?
>
> If you are talking about using the LEARN function on the BC2000, then even if
> the DW would output parameter sysex it is of limited use except for the buttons
> on the BC2000.
>
> The BC2000 can be much more extensively programmed with an PC editor and you can
> have the knobs and buttons working the DW in real time (even the sliders if you
> have a BCF2000).
>
> A lot of this work has already been done for you and it is available for free on
> the Yahoo BC2000 group.
>