Korg DW8000, Mono/Poly, MS-20...

If one of you with proper scans of the P61 manual would upload it here that would be brilliant, Ive got a P61 with a bad voice (definetly on the voice board, just a high pitch, CV and clocks from digital is ok, but when connected the voice resets the clocks so they no longer send) 
but the low res manual is a pain to read and traces almost invisible. 

--- In DW8000@yahoogroups.com, "synth_o_sphere" <stannloo@...> wrote:
>
> Hi, 
> I don't know if others can see what you posted but I can't.
> There's nothing...
>  :-(
> 
> I went on Korg's website and couldn't find one, so I clicked on the "Contact Us" link and sent them an email requesting it (and the PolySix's).
> 
> Still haven't heard from them...
> 
> I was thinking of uploading it here, in the FILES section once I receive it, but if you wanna go ahead and do that before me, you are more than welcome to!
> 
> I have also ordered high quality reproduction of the Polysix ones, including the schematics on 11x17 sheets!  If anything is not clear on the PDF, I can check on my paper version once I get them to clarify stuff.
> 
> -Synth-O-Sphere
> 
> 
> --- In DW8000@yahoogroups.com, Francois <fx_maletras@> wrote:
> >
> > 
> > Thanks, but your link points to a low res copy.
> > Below is a comparison. 
> > 
> > Lo res copy:
> > 
> > 
> > 
> > 
> > Slightly better res copy from korg service site: 
> > 
> > 
> > 
> > FX
> > 
> > On 12 Jul 2013, at 23:56, iskandar <iskandar@> wrote:
> > 
> > > You will the service manual here
> > > http://www.cem3374.com/archive/korg.htm
> > > 
> > > Alex.
> > > 
> > > Le 12/07/2013 23:59, Francois a écrit :
> > >>  
> > >> Hi SOS 
> > >> 
> > >> I went to the korg service site and asked for the original manual, which they were kind enough to provide by email a couple of days later. This PDF is good quality and you can discern all components values. Hope this helps. 
> > >> 
> > >> FX
> > >> 
> > >> On 12 Jul 2013, at 18:10, "synth_o_sphere" <stannloo@> wrote:
> > >> 
> > >>>  
> > >>> Hi maletras, 
> > >>> 
> > >>> In the same boat here...
> > >>> 
> > >>> Did you manage to find one?
> > >>> I've seen some for sale on eBay, which are supposedly good photocopies, but I'm not sure how good.
> > >>> 
> > >>> Actually, I'm not even sure how good the originals were.
> > >>> (which could explain why the PDF we can find now are not so great).
> > >>> 
> > >>> Anyone here has a good very readable copy??
> > >>> Or can answer as to if the original one has good quality?
> > >>> 
> > >>> Thanks!
> > >>> -SOS
> > >>> 
> > >>> --- In DW8000@yahoogroups.com, "fx_maletras" <fx_maletras@> wrote:
> > >>> >
> > >>> > Hi people
> > >>> > 
> > >>> > My poly 61 has had it. Battery leaked. Programmer board not responding. I will change the                     batt but I am also keen to understand the whole synth better so i can continue to fix it in the future, and perhaps mod it.This is an opportunity. 
> > >>> > Question is: how / where can I get a good resolution PDF copy of the PDF service manual? The PDF exists on the web but very low quality, not "quite" sufficient for what i want to do. This group also has a copy but incomplete and low quality.
> > >>> > Any ideas?
> > >>> > 
> > >>> > FX
> > >>> >
> > >>> 
> > > 
> > >
> >
>