Yamaha DTXpress/DTXplorer/DTXtreme group photo

Yahoo Groups archive

Yamaha DTXpress/DTXplorer/DTXtreme

Index last updated: 2026-04-28 22:44 UTC

Thread

Pads

Pads

2001-05-30 by Jay Welch

Are all DTXpress kits shipped with the same pads? If so which one. I have a bad kick drum and I am trying to order a sensor. I do not have my DTXpress in front of me to check.
Thanks,
Jay

Re: [DTXpress] Pads

2001-05-30 by lovesign@talk21.com

Has anyone else had any trouble with the threads wearing down on the bolts that clamp the pads in2 place ?
Virtually all of mine have either jammed or worn away within 6 months !

Lovesign
Peace & B Wild.





--------------------
talk21 your FREE portable and private address on the net at http://www.talk21.com

Re: [DTXpress] Pads

2001-05-31 by cpetrone@altavista.com

On Wed, 30 May 2001, lovesign@... wrote:

> 
> 
> Has anyone else had any trouble with the threads wearing down on the bolts that clamp the pads in2 place ?
> Virtually all of mine have either jammed or worn away within 6 months !
> 
> Lovesign
> Peace & B Wild.
> 

Yeah,
I wrenched down on my snare pad clamp and now it is on its way out. the bolt is hard to turn and is just a few readjustments from striping completely. I wonder what Yamaha charges for a new turn knob and nut?

Gold is valuable. 
That's why we call it the "Golden Rule"!
Find the best deals on the web at AltaVista Shopping!
http://www.shopping.altavista.com

Re: [DTXpress] Pads

2001-05-31 by Wagner

Yeah me...
Had the same problem!
Oh well try wing nut screws to replace them thats what I'm going to do..
----- Original Message -----
From: <cpetrone@...>
To: <DTXpress@yahoogroups.com>
Sent: Wednesday, May 30, 2001 7:22 PM
Subject: Re: [DTXpress] Pads


> On Wed, 30 May 2001, lovesign@... wrote:
>
> >
> >
> > Has anyone else had any trouble with the threads wearing down on the
bolts that clamp the pads in2 place ?
> > Virtually all of mine have either jammed or worn away within 6 months !
> >
> > Lovesign
> > Peace & B Wild.
> >
>
> Yeah,
> I wrenched down on my snare pad clamp and now it is on its way out. the
bolt is hard to turn and is just a few readjustments from striping
completely. I wonder what Yamaha charges for a new turn knob and nut?
Show quoted textHide quoted text
>
> Gold is valuable.
> That's why we call it the "Golden Rule"!
> Find the best deals on the web at AltaVista Shopping!
> http://www.shopping.altavista.com
>
> Community email addresses:
>   Post message: DTXpress@onelist.com
>   Subscribe:    DTXpress-subscribe@onelist.com
>   Unsubscribe:  DTXpress-unsubscribe@onelist.com
>   List owner:   DTXpress-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/DTXpress
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Re: Pads

2001-05-31 by groovinbill@yahoo.com

I had the same problem with one pad clamp after 4 months of use.  I 
was tearing kit down 4 times a week for church play and re-assembly 
at home.  Went to Mars Music where I purchased the kit and they 
ordered a new clamp for me.  However, they gave me great advice.  
When removing pads, just undo clamp under pad, not the clamp that 
holds the pad arm.  I should have known that.  Since then, no 
problems since I pad angles and placements don't change for me.
Hope this helps someone.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.