Yamaha DTXpress/DTXplorer/DTXtreme group photo

Yahoo Groups archive

Yamaha DTXpress/DTXplorer/DTXtreme

Index last updated: 2026-04-28 22:44 UTC

Thread

Clips to hold cords to rack?

Clips to hold cords to rack?

2004-08-26 by contract731@comcast.net

Since I am a newbe and very anal about a clean look,
what is a good and cheap (other than those little plastic straps that lock semi-permanently and you have to cut loose) to hold cords against the rack?

Is there a clip for it?

Thanks

Don

Re: Clips to hold cords to rack?

2004-08-26 by moosetication

--- contract731 wrote:
> Since I am a newbe and very anal about a clean look, 
> what is a good and cheap to hold cords against the rack?
> Is there a clip for it?

Roland do a set of clips that will fit the Yamaha rack (same 1.5" 
tube size). They turn up on eBay quite regularly. They do tend to 
scratch the powder coating though, so be careful. Otherwise you can 
use velcro (hook and loop) fabric strips.

And don't be in too much of a hurry to set anything in concrete just 
yet - you'll be playing with layout for a while yet, and there's 
nothing half as frustrating as having to tear down cabling you spent 
half a day making neat and tidy. Trust me on this one...

Stewart

Re: [DTXpress] Re: Clips to hold cords to rack?

2004-08-26 by contract731@comcast.net

Stewart, yes I know, I am learning the hard way  ;(
Thanks
d
Show quoted textHide quoted text
-------------- Original message -------------- 
--- contract731 wrote:
> Since I am a newbe and very anal about a clean look, 
> what is a good and cheap to hold cords against the rack?
> Is there a clip for it?

Roland do a set of clips that will fit the Yamaha rack (same 1.5" 
tube size). They turn up on eBay quite regularly. They do tend to 
scratch the powder coating though, so be careful. Otherwise you can 
use velcro (hook and loop) fabric strips.

And don't be in too much of a hurry to set anything in concrete just 
yet - you'll be playing with layout for a while yet, and there's 
nothing half as frustrating as having to tear down cabling you spent 
half a day making neat and tidy. Trust me on this one...

Stewart



Community email addresses:
Post message: DTXpress@yahoogroups.com
Subscribe: DTXpress-subscribe@yahoogroups.com
Unsubscribe: DTXpress-unsubscribe@yahoogroups.com
List owner: DTXpress-owner@yahoogroups.com

Shortcut URL to this page:
http://groups.yahoo.com/group/DTXpress

Alternate DTXpress site:
http://www.dtxpressions.com 


Yahoo! Groups Sponsor
ADVERTISEMENT






Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/DTXpress/

To unsubscribe from this group, send an email to:
DTXpress-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.