--- In DTXpress@yahoogroups.com, "bongokonzelmann" <carsten@h...> wrote: > Dear all, > > I am considering to buy another cymbal - PCY 150S, to be used as a > ride. Is it possible to run the kit given the following: > - the PCY150S shall have different bell and ride sound but must not > show the choking feature > - two other cymbal PCY65S would also be run. Both shall have the > choking feature > - the rest is according to the normal DTXPIII ST setup. > How to assign the inputs 1-10? > > Thanks for your help in advance. > > -Bongo- 1 - crash (PCY65s) 2 - snare (TP65s) 3 - tom1 (TP65) 4 - tom2 (TP65) 5 - tom3 (TP65) 6 - ride (PCY150s) 7 - crash (PCY65s) 8 - hihat (TP65) 9 - kick (KP65) 10 - cymbal (PCY65) [Plug into KP65] The only problem with the I/III modules is that choking is enabled on all inputs 1-8. On the II choking was only available on inputs 2,6,7. I don't have the III module, but with the pad is assigned as type RHH130, the choking is disabled. So you maybe able to setup the PCY150s as a type RHH130 and see if it works, which theoretically should disable the choking, but you will have to see how the bell/pad/rim setups and triggers. OGD
Message
Re: Running PCY150S, input selection
2004-07-05 by oldguydrummer