Yamaha DTXpress/DTXplorer/DTXtreme

Hi Jon:  I run the wires coming from my floor tom, up the side rack, and use 
a tie wrap, then I do the same for the tom, toms, continuing to go to the 
left, then down to the floor.  At that point, they should all be hanging from the 
module to the floor, and then I use a three to four foot mesh, which I found 
in bestbuy, and wrap the wires, so that they are all together.  The tie wraps, 
help to clean up any loose wires around the rack.  Its not perfect, but alot 
better then it was before.  Also for the cymbals I tie wrap them down the shaft.

Good Luck,  and let me know if I helped,  Jerry