I think he wants to use two pedals on the one kick pad. It can
be done with some bending of the beater rods. I have seen a photo of it but
don't remember where. Maybe in this lists photo section.
Ken
;
----- Original Message -----From: oldguydrummerSent: Friday, April 30, 2004 11:18 PMSubject: [DTXpress] Re: Double Bass--- In DTXpress@yahoogroups.com, Frank & Susan Malinowski
<yakers@e...> wrote:
> My son would like to add a double bass to his DTXpress I, is there
a way to
> do this? I tried to search previous messages but all the traffic I
found
> was about later models.
Since the kick is just a mono trigger type, all you need is a spare
input like 9 or 10 to plug the second one into. Then you will need to
setup the trigger type for the input you use and then just assign a
bass drum voice to the pad.
On the newer KP65 kick pad there is a second jack for plugging a
second mono pad into, like a second bass drum pad (KP60 or KP65). If
you go this route you will need to plug the KP65 in inputs 9/10,
instead of the pad1 input and you will need to setup the trigger
types for inputs 9/10 for the kick pads being used and setup the
voices assigned to them as well.
OGD
Community email addresses:
Post message: DTXpress@yahoogroups.com
Subscribe: DTXpress-subscribe@yahoogroups.com
Unsubscribe: DTXpress-unsubscribe@yahoogroups.com
List owner: DTXpress-owner@yahoogroups.com
Shortcut URL to this page:
http://groups.yahoo.com/group/DTXpress
Alternate DTXpress site:
http://www.dtxpressions.com