Yamaha DTXpress/DTXplorer/DTXtreme

Glad it's helped, Ken.

a couple of other things came back to me during the day...

I think I also played around with the Trigger settings - if you hit 
a pad then the Trigger button on the module and then use the Page 
Down button you can set values for the default output for the pad 
when struck.  
If like me you are not a 'tree bender' (love that expression :-) you 
might try tweaking up the default level (try hitting the pad and see 
how close you are getting to 99%).  This can lead to a lack of 
dynamic range but may be worth a try.
And another thing I did was turn up the sensitivity on the bass drum 
pad - there is a knob on the front (in the Mk1 there is also a slide 
switch) - too high and it may double trigger but again could be 
worth a try.

FWIW I run the output from my Dtxpress Mk1 through a signal 
processor to help with the final sound before going to the PA.

regards,
William

.


--- In DTXpress@yahoogroups.com, "Ken" <boomer17@a...> wrote:
> Exactly what I was looking for. Thanks.
> 
> Ken
>