Additional note: Notice on the PCB on the PCY65S that resistor R2 is not a resistor at all but just a jumper cable. The extra resistors exists on the TP65S to create the three zone snare. The question now is was the PCY65S original suppose to be a three zone cymbal, but was reduced to a two zone for cost/technological issues???? The plot thickens!! OGD ************************************************************************** The information transmitted herewith is sensitive information intended only for use to the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ________________________________________________________________________ This email has been scanned for all viruses by the MessageLabs Email Security System. For more information on a proactive email security service working around the clock, around the globe, visit http://www.messagelabs.com ________________________________________________________________________
Message
RE: [DTXpress] Re: Difference between PCY65S and PCY80S?
2003-09-12 by rdamon@mckinney-usa.com
Attachments
- No local attachments were found for this message.