Hi, I am slightly experienced drummmer but not so knowledgeable on electronics and the DTX v.2 which I bought recently. My main problem is about rim shot and cross stick sounds. I can not take them off from the set any longer. Every part of tp65s responses in the same way like I hit in the middle of it. I have not done anything on the original set up and it's been working fine since I bought it - 2 months- except this newly appeared problem. What do all guys think about that? Could something be damaged in it? Regards Gökhan * I only came across to the message below and tried to apply instructions and failed as there is no response on the rim. * The snare needs a stereo cable. The trigger needs to be set to a TP65-1 (the TP65 is for the single zone pads, the TP65-1 is for the three zone pad.) When you go into edit voice, tap the center of the pad, menu should say "snare", when you tap one side of the rim the menu should say "snare- r1" (rim 1) and when you tap the other side rim, the menu should say "snare r2" (rim 2). Once you get those to appear on the menu, just scroll down and select the voice you like. For example: snare = S\001 loosy (the pad sound) ; snare r1= S\002 LoosyRim (the rim shot); snare r2= S\109 s sstck1 (cross stick)
Message
rim shot and cross stick
2003-08-10 by apolt.rm