Yamaha DTXpress/DTXplorer/DTXtreme

The T clamp was $8, the "feet" was $6, the Std 1.5
inch tubing (1 ft. piece)-this sets on the floor
T<-upside down the 1 ft piece is the "top" of the
letter T----this piece was $7, and the Std. 1.5 tubing
for the straight piece of the T was $22.  I still have
the clamps, 4' piece and some "feet" (these go on the
end of the bottom T piece on each side).  I saved
these pieces for future use.  I had to add a T to
mount my one brain on the rack to give it stability.
Hope this helps ya out, good buddy!
Jade
--- underneathheaven <realvast@...> wrote:
> Jade, about how much was your total cost?
> 
> -UN.H
> 
> 
> 
> 
> --- In DTXpress@yahoogroups.com, Jade
> <jadiebooshkie@y...> wrote:
> > UNH
> > Almost forgot...you would have to buy another rack
> > pipe-one for the main leg, and one for the actual
> > foot...and don't forget rubber shoes for the
> actual
> > feet.
> > Jade
> > --- Jade <jadiebooshkie@y...> wrote:
> > > UN.H
> > > You need  a T-Fitting (TFG-150 #11592)-You can
> get
> > > it
> > > from Drumbalaya....I got mine from them.
> > > Jade
> > > --- underneathheaven <realvast@s...> wrote:
> > > > Hey everybody!  Does anyone know if drumbalaya
> > > > carries the 
> > > > neccessary parts to make a T-Leg?  I just
> attached
> > > a
> > > > 33 inch arm to 
> > > > my set and I wanted to make it a little more
> > > stable
> > > > with the extra 
> > > > leg.  Or has anyone ever made one even? 
> Thanks!!
> > > > 
> > > > -UN.H
> > > > 
> > > > 
> > > 
> > > 
> > > __________________________________
> > > Do you Yahoo!?
> > > The New Yahoo! Search - Faster. Easier. Bingo.
> > > http://search.yahoo.com
> > > 
> > 
> > 
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo.
> > http://search.yahoo.com
> 
> 


__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com