Yamaha DTXpress/DTXplorer/DTXtreme group photo

Yahoo Groups archive

Yamaha DTXpress/DTXplorer/DTXtreme

Index last updated: 2026-04-28 22:44 UTC

Message

Re: [DTXpress] Re: accented note on snare don't work while i hit another pad !

2002-11-21 by Walt

Hi Stephanie,

I assumed ghost notes was what you were having trouble
with.  The soft hits are the ones you notice problems
with more often than hard hits.  Walt
--- dopmi <mapod@...> wrote:
> Hi , i din't have time to test many possibility but
> i don't yet 
> resolved the problem between snare and hit hat ,
> also i just realize 
> one error on my first post , it's not when i play
> accented note that 
> the snare don't work but when i play Unacented note
> , when i wrote my 
> first post i talked about pratice accented note but
> i forget to 
> precise that that's the ghost note who was the
> problem ( yea a little 
> confusing ;-)
> Stephane 
> 
> --- In DTXpress@y..., "liberatusvirus"
> <liberatusvirus@y...> wrote:
> > Hi Stephane,
> > 
> > Try what Walt says first.  But it's also possible
> that the gain on 
> > your snare is too low now at 64 (94 was probably
> too high). A more 
> > remote possibility is that the pad type in the
> trigger menu is 
> > wrong. You'll find the cause. 
> > 
> > Ed
> > 
> > 
> > --- In DTXpress@y..., Walt <wgardus@y...> wrote:
> > > Hi Stephane,
> > > 
> > > I wish it was easy to specify a default, but it
> is not
> > > that simple - each setup is different.  I would
> > > approach the problem by changing the Specific
> > > Rejection value to zero, then hit the HH as hard
> as
> > > you ever would, if the snare trigger fires
> because you
> > > are hitting the HH pad then I would raise the
> value by
> > > 1 and try again.  You only want enough rejection
> to
> > > prevent false triggere, but not enough to block
> your
> > > snare accent notes.  If that doesn't work you
> may also
> > > have to reduce the sensitivity of the snare to
> correct
> > > this problem, or find a way to physically block
> the
> > > vibrations of hitting the HH from being
> transmitted to
> > > the snare - it is like tring to walk on a wire -
> you
> > > must find the balance point between many
> variables,
> > > but try adjusting the rejection first!
> > > 
> > > Walt
> > > 
> > > .  --- dopmi <mapod@w...> wrote:
> > > > Hi Walt , i think you found the problem ;-) ,
> the
> > > > problem with this 
> > > > trigger setting is that when you make a change
> ( i
> > > > think i made one 
> > > > without noticed that ) you don't have the
> alert to
> > > > comfirm ( like 
> > > > when you change you voice you have the " are
> you
> > > > sure? " ) all that 
> > > > rejection setting are new to me , i find how
> to make
> > > > snare work find 
> > > > with all pad , only snare with hit hat still
> don't
> > > > work fine , can 
> > > > you give me the default setting ? i try some
> > > > changement between hit 
> > > > hat and snare and problem still here for now
> ...
> > > > Thanks You 
> > > > Stephane
> > > > 
> > > > --- In DTXpress@y..., Walt <wgardus@y...>
> wrote:
> > > > > Hi Stepane,
> > > > > 
> > > > > In your trigger setting for your snare, do
> you
> > > > have
> > > > > specific rejection specified for the input
> your HH
> > > > is
> > > > > on?  If so you may want to reduce the value
> and
> > > > see if
> > > > > the problem goes away.  Walt
> > > > > --- dopmi <mapod@w...> wrote:
> > > > > > Hi , i was practicing accented note
> between hit
> > > > hat
> > > > > > and snare and i 
> > > > > > saw that my accented note on snare pad
> don't
> > > > work (
> > > > > > silence ) while i 
> > > > > > hit at the same time hit hat , i first
> think
> > > > it's
> > > > > > because they are 
> > > > > > too close and maybe vibration cause that
> but
> > > > it's
> > > > > > the same if i hit 
> > > > > > at the same time any others pad ! , that
> happen
> > > > for
> > > > > > accented note and 
> > > > > > when i play a little more then acentued ,
> > > > apparently
> > > > > > that not happen 
> > > > > > when i play non acentued note , my level
> gain on
> > > > > > snare was 94 , i 
> > > > > > reduce to 64 and problem still the same ,
> > > > anybody
> > > > > > had this problem or 
> > > > > > understand what happen ? is it a pad
> problem or
> > > > a
> > > > > > module problem ? 
> > > > > > thank's for you help 
> > > > > > Stephane 
> > > > > > 
> > > > > > 
> > > > > 
> > > > > 
> > > > >
> __________________________________________________
> > > > > Do you Yahoo!?
> > > > > Yahoo! Web Hosting - Let the expert host
> your site
> > > > > http://webhosting.yahoo.com
> > > > 
> > > > 
> > > 
> > > 
> > >
> __________________________________________________
> > > Do you Yahoo!?
> > > Yahoo! Web Hosting - Let the expert host your
> site
> > > http://webhosting.yahoo.com
> 
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus \ufffd Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.