Yamaha DTXpress/DTXplorer/DTXtreme

Hi Stephane,

Try what Walt says first.  But it's also possible that the gain on 
your snare is too low now at 64 (94 was probably too high). A more 
remote possibility is that the pad type in the trigger menu is 
wrong. You'll find the cause. 

Ed


--- In DTXpress@y..., Walt <wgardus@y...> wrote:
> Hi Stephane,
> 
> I wish it was easy to specify a default, but it is not
> that simple - each setup is different.  I would
> approach the problem by changing the Specific
> Rejection value to zero, then hit the HH as hard as
> you ever would, if the snare trigger fires because you
> are hitting the HH pad then I would raise the value by
> 1 and try again.  You only want enough rejection to
> prevent false triggere, but not enough to block your
> snare accent notes.  If that doesn't work you may also
> have to reduce the sensitivity of the snare to correct
> this problem, or find a way to physically block the
> vibrations of hitting the HH from being transmitted to
> the snare - it is like tring to walk on a wire - you
> must find the balance point between many variables,
> but try adjusting the rejection first!
> 
> Walt
> 
> .  --- dopmi <mapod@w...> wrote:
> > Hi Walt , i think you found the problem ;-) , the
> > problem with this 
> > trigger setting is that when you make a change ( i
> > think i made one 
> > without noticed that ) you don't have the alert to
> > comfirm ( like 
> > when you change you voice you have the " are you
> > sure? " ) all that 
> > rejection setting are new to me , i find how to make
> > snare work find 
> > with all pad , only snare with hit hat still don't
> > work fine , can 
> > you give me the default setting ? i try some
> > changement between hit 
> > hat and snare and problem still here for now ...
> > Thanks You 
> > Stephane
> > 
> > --- In DTXpress@y..., Walt <wgardus@y...> wrote:
> > > Hi Stepane,
> > > 
> > > In your trigger setting for your snare, do you
> > have
> > > specific rejection specified for the input your HH
> > is
> > > on?  If so you may want to reduce the value and
> > see if
> > > the problem goes away.  Walt
> > > --- dopmi <mapod@w...> wrote:
> > > > Hi , i was practicing accented note between hit
> > hat
> > > > and snare and i 
> > > > saw that my accented note on snare pad don't
> > work (
> > > > silence ) while i 
> > > > hit at the same time hit hat , i first think
> > it's
> > > > because they are 
> > > > too close and maybe vibration cause that but
> > it's
> > > > the same if i hit 
> > > > at the same time any others pad ! , that happen
> > for
> > > > accented note and 
> > > > when i play a little more then acentued ,
> > apparently
> > > > that not happen 
> > > > when i play non acentued note , my level gain on
> > > > snare was 94 , i 
> > > > reduce to 64 and problem still the same ,
> > anybody
> > > > had this problem or 
> > > > understand what happen ? is it a pad problem or
> > a
> > > > module problem ? 
> > > > thank's for you help 
> > > > Stephane 
> > > > 
> > > > 
> > > 
> > > 
> > > __________________________________________________
> > > Do you Yahoo!?
> > > Yahoo! Web Hosting - Let the expert host your site
> > > http://webhosting.yahoo.com
> > 
> > 
> 
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Web Hosting - Let the expert host your site
> http://webhosting.yahoo.com