Yamaha DTXpress/DTXplorer/DTXtreme

Hi Stephane,

I wish it was easy to specify a default, but it is not
that simple - each setup is different.  I would
approach the problem by changing the Specific
Rejection value to zero, then hit the HH as hard as
you ever would, if the snare trigger fires because you
are hitting the HH pad then I would raise the value by
1 and try again.  You only want enough rejection to
prevent false triggere, but not enough to block your
snare accent notes.  If that doesn't work you may also
have to reduce the sensitivity of the snare to correct
this problem, or find a way to physically block the
vibrations of hitting the HH from being transmitted to
the snare - it is like tring to walk on a wire - you
must find the balance point between many variables,
but try adjusting the rejection first!

Walt

.  --- dopmi <mapod@...> wrote:
> Hi Walt , i think you found the problem ;-) , the
> problem with this 
> trigger setting is that when you make a change ( i
> think i made one 
> without noticed that ) you don't have the alert to
> comfirm ( like 
> when you change you voice you have the " are you
> sure? " ) all that 
> rejection setting are new to me , i find how to make
> snare work find 
> with all pad , only snare with hit hat still don't
> work fine , can 
> you give me the default setting ? i try some
> changement between hit 
> hat and snare and problem still here for now ...
> Thanks You 
> Stephane
> 
> --- In DTXpress@y..., Walt <wgardus@y...> wrote:
> > Hi Stepane,
> > 
> > In your trigger setting for your snare, do you
> have
> > specific rejection specified for the input your HH
> is
> > on?  If so you may want to reduce the value and
> see if
> > the problem goes away.  Walt
> > --- dopmi <mapod@w...> wrote:
> > > Hi , i was practicing accented note between hit
> hat
> > > and snare and i 
> > > saw that my accented note on snare pad don't
> work (
> > > silence ) while i 
> > > hit at the same time hit hat , i first think
> it's
> > > because they are 
> > > too close and maybe vibration cause that but
> it's
> > > the same if i hit 
> > > at the same time any others pad ! , that happen
> for
> > > accented note and 
> > > when i play a little more then acentued ,
> apparently
> > > that not happen 
> > > when i play non acentued note , my level gain on
> > > snare was 94 , i 
> > > reduce to 64 and problem still the same ,
> anybody
> > > had this problem or 
> > > understand what happen ? is it a pad problem or
> a
> > > module problem ? 
> > > thank's for you help 
> > > Stephane 
> > > 
> > > 
> > 
> > 
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Web Hosting - Let the expert host your site
> > http://webhosting.yahoo.com
> 
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - Let the expert host your site
http://webhosting.yahoo.com