Yamaha DTXpress/DTXplorer/DTXtreme group photo

Yahoo Groups archive

Yamaha DTXpress/DTXplorer/DTXtreme

Index last updated: 2026-04-28 22:44 UTC

Message

Re: User kit downloads.

2002-07-11 by jimbosharp72

Hi Walt,
Yeah, I used that one a few days back. I was actually referring to 
the one off the home page, the "downloads" link off the orange module 
logo. Oh well, just hope that people still look at the files I guess.
Cheers anyway,

Jim
--- In DTXpress@y..., "wgardus" <wgardus@y...> wrote:
> Hey Jim,
> 
> I just tried it quick (I assume you're talking about the User Kits
> folder in the files section of the group)- and I was able to 
download
> the first one (Bigkit?) to my PC, and I got to the point where it
> seemed like it was ready to upload it back again when I stoped it.  
> 
> Walt  
> 
> --- In DTXpress@y..., "James Sharp" <jimbosharp@t...> wrote:
> > Is it just me, or is the link broken to the user kits?
> > Giles, any ideas? I'd like to send some more good stuff in.
> > 
> > Jim.
> > 
> > -----Original Message-----
> > From: DTXpress@y... [mailto:DTXpress@y...]
> > Sent: 09 July, 2002 11:07
> > To: DTXpress@y...
> > Subject: [DTXpress] Digest Number 600
> > 
> > 
> > 
> > Community email addresses:
> >   Post message: DTXpress@o...
> >   Subscribe:    DTXpress-subscribe@o...
> >   Unsubscribe:  DTXpress-unsubscribe@o...
> >   List owner:   DTXpress-owner@o...
> > 
> > Shortcut URL to this page:
> >   http://www.onelist.com/community/DTXpress
> > ------------------------------------------------------------------
------
> > 
> > There are 2 messages in this issue.
> > 
> > Topics in this digest:
> > 
> >       1. Re: Re: Anyone else ever had this problem?
> >            From: "Sam P." <evolve555@h...>
> >       2. Re: Anyone else ever had this problem?
> >            From: "okant" <okant@y...>
> > 
> > 
> > 
______________________________________________________________________
__
> > 
______________________________________________________________________
__
> > 
> > Message: 1
> >    Date: Mon, 8 Jul 2002 12:25:01 -0700
> >    From: "Sam P." <evolve555@h...>
> > Subject: Re: Re: Anyone else ever had this problem?
> > 
> > It is definately registering the hit, (I basically went into the
> voice edit
> > function and hit other pads and watched it change, and sure 
enough I hit
> > tom2 and it swithed as well and showed that it registered the hit,
> even gave
> > me a velocity reading but no sound) basically I think I somehow 
globally
> > turned off all the bass drums, because I noticed the problem
> affected only
> > the kick sounds. I wrote down all my settings for each pad, and 
then
> I reset
> > the entire unit back to it's factory settings and remapped my 
kits.
> > Painstaking process but it worked and did it just in time to make
> the show..
> >   ----- Original Message -----
> >   From: okant
> >   To: DTXpress@y...
> >   Sent: Sunday, July 07, 2002 10:45 PM
> >   Subject: [DTXpress] Re: Anyone else ever had this problem?
> > 
> > 
> >   What happens when you change the voice or note number on tom2? 
Can
> >   you tell if it's registering the hit but not producing a sound, 
or
> >   it's simply not registering the hit?
> > 
> >   Okan
> > 
> >   --- In DTXpress@y..., "Sam P." <evolve555@h...> wrote:
> >   > I was at rehearsal the other day when all of a sudden one of 
my tom
> >   pads went out. The thing is, the one that went out was on Tom2, 
and I
> >   assigned a bass drum to it because I was playing along with 
loops on
> >   those pads. So I immediately switched to another kit to 
troubleshoot
> >   the problem, and alas, that pad was out on other kits. So I 
switched
> >   it one last time and the pad came back to life, but only on 
kits that
> >   weren't assigned that particular bass drum sound that I 
assigned to
> >   it. When it's any other kit, the pad works great. When it's a 
kit
> >   that I am using that I assigned that particular bass drum to 
that
> >   pad, that pad doesn't play at all. But the pad still triggers,
> >   obviously because it works on other kits and it triggers it to 
switch
> >   when I hit the pad when I go into the VOICE edit mode. It is 
the most
> >   bizarre thing.. any clues?
> >   > Thanks
> >   > Sam
> >   > www.imperativereaction.com
> > 
> > 
> >   Community email addresses:
> >     Post message: DTXpress@o...
> >     Subscribe:    DTXpress-subscribe@o...
> >     Unsubscribe:  DTXpress-unsubscribe@o...
> >     List owner:   DTXpress-owner@o...
> > 
> >   Shortcut URL to this page:
> >     http://www.onelist.com/community/DTXpress
> > 
> >   Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.
> > 
> > 
> > 
> > [This message contained attachments]
> > 
> > 
> > 
> > 
______________________________________________________________________
__
> > 
______________________________________________________________________
__
> > 
> > Message: 2
> >    Date: Tue, 09 Jul 2002 06:06:50 -0000
> >    From: "okant" <okant@y...>
> > Subject: Re: Anyone else ever had this problem?
> > 
> > That's weird. Hope it never happens again...
> > 
> > Okan
> > --- In DTXpress@y..., "Sam P." <evolve555@h...> wrote:
> > > It is definately registering the hit, (I basically went into the
> > voice edit function and hit other pads and watched it change, and
> > sure enough I hit tom2 and it swithed as well and showed that it
> > registered the hit, even gave me a velocity reading but no sound)
> > basically I think I somehow globally turned off all the bass 
drums,
> > because I noticed the problem affected only the kick sounds. I 
wrote
> > down all my settings for each pad, and then I reset the entire 
unit
> > back to it's factory settings and remapped my kits. Painstaking
> > process but it worked and did it just in time to make the show..
> > >   ----- Original Message -----
> > >   From: okant
> > >   To: DTXpress@y...
> > >   Sent: Sunday, July 07, 2002 10:45 PM
> > >   Subject: [DTXpress] Re: Anyone else ever had this problem?
> > >
> > >
> > >   What happens when you change the voice or note number on tom2?
> > Can
> > >   you tell if it's registering the hit but not producing a 
sound,
> > or
> > >   it's simply not registering the hit?
> > >
> > >   Okan
> > >
> > >   --- In DTXpress@y..., "Sam P." <evolve555@h...> wrote:
> > >   > I was at rehearsal the other day when all of a sudden one 
of my
> > tom
> > >   pads went out. The thing is, the one that went out was on 
Tom2,
> > and I
> > >   assigned a bass drum to it because I was playing along with 
loops
> > on
> > >   those pads. So I immediately switched to another kit to
> > troubleshoot
> > >   the problem, and alas, that pad was out on other kits. So I
> > switched
> > >   it one last time and the pad came back to life, but only on 
kits
> > that
> > >   weren't assigned that particular bass drum sound that I 
assigned
> > to
> > >   it. When it's any other kit, the pad works great. When it's a 
kit
> > >   that I am using that I assigned that particular bass drum to 
that
> > >   pad, that pad doesn't play at all. But the pad still triggers,
> > >   obviously because it works on other kits and it triggers it to
> > switch
> > >   when I hit the pad when I go into the VOICE edit mode. It is 
the
> > most
> > >   bizarre thing.. any clues?
> > >   > Thanks
> > >   > Sam
> > >   > www.imperativereaction.com
> > >
> > >
> > >   Community email addresses:
> > >     Post message: DTXpress@o...
> > >     Subscribe:    DTXpress-subscribe@o...
> > >     Unsubscribe:  DTXpress-unsubscribe@o...
> > >     List owner:   DTXpress-owner@o...
> > >
> > >   Shortcut URL to this page:
> > >     http://www.onelist.com/community/DTXpress
> > >
> > >   Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service.
> > 
> > 
> > 
> > 
______________________________________________________________________
__
> > 
______________________________________________________________________
__
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.