My experience with that problem was sloved by putting a thin layer of duct tape on the mounting post for the pad, if you don't play too hard the duct tape should absorb enough of the shock. Be careful when taking the pads on and off the mount because the tape get very messy when not taken care of. -Joe --- In DTXpress@y..., cisum64@e... wrote: > I have recently set up my DTXPRESS unit and pads to intermingle with > my acoustic drumset. I love the setup (inspired by Akiro Jimbo) but I > have a problem with the acoustic drum vibrations triggering > electronic sounds. In other words, when I hit my acoustic bass > drum/mounted toms, etc., I hear the patches from my electronic pads. > I have messed around with the GAIN and MVEL settings, but I still > have this trouble. > > Any suggestions from the fine folk out there would be greatly > appreciated. > > Thanks, > > Scott
Message
Re: Combining DT pads with acoustic drums
2001-11-28 by palacki808@yahoo.com
Attachments
- No local attachments were found for this message.