hey thanks for the info. i'll try to contact them ,and see if they could
help me through it,does pintech have a phone # on their site???
thanks again,
sam
----- Original Message -----
From: "Richard C. MacDonald" <vcrmac1@...>
To: <DTXpress@yahoogroups.com>
Sent: Saturday, October 27, 2001 11:35 AM
Subject: Re: [DTXpress] using the pintech hyperhat with the dtxepress module
> I'm not familiar with that pedal but I do have a Pintech dual-zone pad. I
> had some trouble with settings initially and calling Pintech was very
> helpful. If you are not in the USA, they'll respond to e-mail. They were
> happy to help and had actually just picked up a DTXpress so they can work
> through the setup problems.
>
> Rick
>
> -----Original Message-----
> From: reva@... <reva@...>
> To: DTXpress@yahoogroups.com <DTXpress@yahoogroups.com>
> Date: Friday, October 26, 2001 11:26 PM
> Subject: [DTXpress] using the pintech hyperhat with the dtxepress module
>
>
> >hello all,
> > i just bought a pintech hyperhat pedal from ebay,and
> >can't seem to get it to work with my dtxepress module,i tried this
> >using a stereo cable ,and nothing happened, i had hooked up my old
> >pedal,and it worked fine,i had the pintech pedal tested and it works
> >perfectly,just doesn't seem to want to work on my module,if anyone
> >may know if this pedal is compatable with my module or not,i would
> >really apreciate any info. that you can give me,thanks for your time
> >
> >
> >
> >Community email addresses:
> > Post message: DTXpress@onelist.com
> > Subscribe: DTXpress-subscribe@onelist.com
> > Unsubscribe: DTXpress-unsubscribe@onelist.com
> > List owner: DTXpress-owner@onelist.com
> >
> >Shortcut URL to this page:
> > http://www.onelist.com/community/DTXpress
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
> Community email addresses:
> Post message: DTXpress@onelist.com
> Subscribe: DTXpress-subscribe@onelist.com
> Unsubscribe: DTXpress-unsubscribe@onelist.com
> List owner: DTXpress-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/DTXpress
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>Message
Re: [DTXpress] using the pintech hyperhat with the dtxepress module
2001-10-27 by reva@nb.net
Attachments
- No local attachments were found for this message.