Yamaha DTXpress/DTXplorer/DTXtreme

--- In DTXpress@yahoogroups.com, "Chris Todesco" <desco@m...> wrote:
> 
> I also meant to ask-- I had mentioned that I adjusted R1 to make the
rim switch more sensitive, but on edrum.for.free.fr it says to adjust
R2 (for the piezo/piezo-to-piezo/switch circuit, not the two-mono-pad
citcuit)...  Is there a difference, or is R1 just adjusting one side
of the threshold, and R2 is adjusting the other so in effect it's the
same thing?
>

You can do either.  Increasing R1 would have a similar effect to
decreasing R2.

Keith.