Yamaha DTXpress/DTXplorer/DTXtreme

--- In DTXpress@yahoogroups.com, "Keith" <keith@k...> wrote:
> 
> 4. No special mounting has been planned.  It has rubber feet so I 
have
> just plonked it on top of the DTXpress box.  Any suggestions
> appreciated (with one eye on cost).
> 
> Keith.

I have tried putting my MP3 player (Creative Jukebox 3) on top of 
the DTXpress "brain" whilst playing - unfortunately the vibration 
makes it creep & eventually fall off (& I'm not a particularly hard 
hitter)- I would suggest either velcro or (provided it won't 
interfere with the electronics) some of that magnetic rubber strip 
they use on the back of fridge magnets. Clearly this will only work 
if the DTXpress brain case is made of steel - I think it is but it 
would be clearly make sense to check with a magnet. I suspect it 
would require a full length strip accross the front/back or on each 
side of the bottom face of the unit, this would do away with the 
need for rubber feet as this material is rubberized - not sure of 
cost but it can't be that expensive if it's used on fridge magnets!

P.S. This gadget sounds interesting - where do I look for a detailed 
description of what it does?

Richard.