The BP10 does have a mechanical setting -- it is available via two screws near the 1/4" jack on the side. Check these adjustments. -Dan -- Dan Mowczan, pinball@... From: "Vivien Emiya" <vivien.emiya@...> Reply-To: DTXpress@yahoogroups.com Date: Tue, 24 Apr 2001 19:22:58 +0200 To: <DTXpress@yahoogroups.com> Subject: Re: [DTXpress] BP10 bar It's maybe a trigger problem. If the existant settings that you can chose in the trig menu(called BP) are not good, try to change the minimum velocity(MVel) in the trig menu but you will lose dynamics. Otherwise, increase the volume of your samples.You can put the volume of the channel 10 to the max in the song displayed below your kit name. Does it work? NB: Be carefull that there are no attenuation on the 9/10 entry. Maybe there is a mechanichal setting on your pad. ----- Original Message ----- From: DrummerB0ui@... To: DTXpress@yahoogroups.com Sent: Tuesday, April 24, 2001 6:34 PM Subject: [DTXpress] BP10 bar I know some of you out there are using the BP10 Dual Trigger bar. I need to know if there is a way to increase the output volume on the bar? I have set up voices on the bar but cannot get the volume to go loud enough to be heard through the PA system. Any help would be greatly appreciated. Scott Community email addresses: Post message: DTXpress@onelist.com Subscribe: DTXpress-subscribe@onelist.com Unsubscribe: DTXpress-unsubscribe@onelist.com List owner: DTXpress-owner@onelist.com Shortcut URL to this page: http://www.onelist.com/community/DTXpress Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . Yahoo! Groups Sponsor Community email addresses: Post message: DTXpress@onelist.com Subscribe: DTXpress-subscribe@onelist.com Unsubscribe: DTXpress-unsubscribe@onelist.com List owner: DTXpress-owner@onelist.com Shortcut URL to this page: http://www.onelist.com/community/DTXpress Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Message
Re: [DTXpress] BP10 bar
2001-04-24 by Dan Mowczan