Dave Smith Instruments SYNTHESIZERS

I cannot for the life of me figure out how to control the evolvers midi clock or make it control  
a midi clock. 
When the midi clock is set to "in-" and I hit the start button the sequence does not proceed.
It would be great if you could help me out.
the nice folks at Dave Smith seemed stumped.

--- In DSI_Evolver@yahoogroups.com, "devonamaldonado"
<devonamaldonado@...> wrote:
>
> I cannot for the life of me figure out how to control the evolvers
midi clock or make it control  
> a midi clock. 
> When the midi clock is set to "in-" and I hit the start button the
sequence does not proceed.
> It would be great if you could help me out.
> the nice folks at Dave Smith seemed stumped.



when the evolver's MIDI clock is set to 'in-' start/stop/continue is
ignored

when the evolver's MIDI clock is set to 'in' it will respond to
start/stop/continue

in either case, the evolver needs a MIDI clock connected to its MIDI in.
so in your scenario above, this is normal - it's waiting for/looking
for MIDI clock.
this is addressed on page 42 of your evolver [desktop] manual.

...zontar