Synth-DIY Yahoo! Groups Archives

Thread

Pulse?

2006-04-03 by all@istar.ca

Greetings,

	Most every sound from the Evolver Mono edition has a pulse or 
beat that I can't seem to control or modify.

	To be frank, the Evolver Mono is stretching my abilities and 
is perhaps just too much for me. I am considering returning it. In 
the meantime, if someone might answer this basic question I would be 
grateful.

	Best wishes and thanks - Christopher

Re: [Evolver] Pulse?

2006-04-03 by James Elliott

Can you please go into more detail about your patch setup? There are entirely too many mod sources available to be able to narrow the issue down with your description.

Please start by answering these questions:

Is this a new or used unit? What are you controlling it with? What patch are you using? Is your controller sending any funky messages?

Then check your mod sources:

Filter mod

FM Levels

All LFO destinations

All Mod destinations

Env 3 destination

Key Velocity destination

Mod wheel destination

Pitch wheel destination

Filter & Amp Env key velocity routings

Trigger settings

Last but not least, and I'm not trying to be rude, did you read the manual?

-Jim

all@... wrote:

Show quoted textHide quoted text

Greetings,

Most every sound from the Evolver Mono edition has a pulse or
beat that I can't seem to control or modify.

To be frank, the Evolver Mono is stretching my abilities and
is perhaps just too much for me. I am considering returning it. In
the meantime, if someone might answer this basic question I would be
grateful.

Best wishes and thanks - Christopher

Blab-away for as little as 1\ufffd/min. Make PC-to-Phone Calls using Yahoo! Messenger with Voice.

Re: [Evolver] Pulse?

2006-04-03 by Ravi Ivan Sharma

Some patches have sequences associated with them that turn on if you press the sequence button. For those, just press stop.

Some patches have an "automatic sequence" associated with them that is based on the TRIGGER MODE. IF you want that to stop, change the TRIGGER MODE to a more normal setting -- you MUST read the manual for this.

Otherwise, you may download hundreds of extra patches for your evolver and replace the sequences you don't like if you don't feel like dealing with reprogramming.

The Evolver is *not* a super complicated synthesizer compared to many others, but then again, even simple synthesizers require some time and effort before one "gets it" unless one simply wants to scroll through presets.

But extra presets are available if that is what you need:

http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=get_topic&f=23&t=000035

Show quoted textHide quoted text

----- Original Message -----

From: all@...

To: DSI_Evolver@yahoogroups.com

Sent: Monday, April 03, 2006 8:22 AM

Subject: [Evolver] Pulse?

Greetings,

Most every sound from the Evolver Mono edition has a pulse or
beat that I can't seem to control or modify.

To be frank, the Evolver Mono is stretching my abilities and
is perhaps just too much for me. I am considering returning it. In
the meantime, if someone might answer this basic question I would be
grateful.

Best wishes and thanks - Christopher

Dave Smith Instruments SYNTHESIZERS

Pulse?

Pulse?

Re: [Evolver] Pulse?

Re: [Evolver] Pulse?

Move to quarantaine