Dave Smith Instruments SYNTHESIZERS group photo

Yahoo Groups archive

Dave Smith Instruments SYNTHESIZERS

Index last updated: 2026-04-28 22:43 UTC

Thread

Re: [Evolver] evolver wave dump utility

Re: [Evolver] evolver wave dump utility

2005-08-16 by Stefan Trippler

http://daz.korgforums.com/evo_wave_dump.php

Regards

Stefan

----- Original Message -----
Show quoted textHide quoted text
From: "prof_lofi" <billthompson@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Tuesday, August 16, 2005 11:34 PM
Subject: [Evolver] evolver wave dump utility


> hi everyone,
>
> had a ram chip go waaaay south on me and had to reinstall my o.s...and
> lost that cool little app. the evo wave dump utility.  the link on the
> page i've found it on is dead.  does anyone know where this might be
> hosted? i really liked that little program quite a bit. i'm running winxp.
>
> thanx in advance,
>
> b.
>
> www.billthompson.org
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Re: Re: [Evolver] evolver wave dump utility

2005-08-16 by Carbon111

>> lost that cool little app. the evo wave dump utility.  the link on the
>> page i've found it on is dead.  does anyone know where this might be
>> hosted? i really liked that little program quite a bit. i'm running winxp.

There's an error in the link on his page. When the page got moved from Irish Acts, he neglected to change the link to his zip file. It should be:

http://daz.korgforums.com/evo_wave_dump.zip

Best Regards, James
--
http://www.carbon111.com/evolver.html

Re: [Evolver] evolver wave dump utility

2005-08-16 by prof_lofi

thanx james!

b.


> There's an error in the link on his page. When the page got moved
from Irish Acts, he neglected to change the link to his zip file. It
should be:
Show quoted textHide quoted text
> 
> http://daz.korgforums.com/evo_wave_dump.zip
> 
> Best Regards, James
> --
> http://www.carbon111.com/evolver.html

New 3.0 update for Evolver

2005-08-16 by Robert Krueger

Hi all,

I've recieved my Evolver upgrade for 3.0.  The instructions state to 
update the DSP software first by loading the 3.0 sysex software.  The 
directions state that a countdown on screen will begin from 58 to 0 
during the midi dump,  then a countdown from 10 to zero as it updates 
the flash.....

I've sent the midi dump several times, and it just sits at zero.  The 
countdown from 10 to zero never happens...

any ideas?

Re: [Evolver] New 3.0 update for Evolver

2005-08-16 by Robert Krueger

Robert Krueger wrote:
> Hi all,
> 
> I've recieved my Evolver upgrade for 3.0.  The instructions state to 
> update the DSP software first by loading the 3.0 sysex software.  The 
> directions state that a countdown on screen will begin from 58 to 0 
> during the midi dump,  then a countdown from 10 to zero as it updates 
> the flash.....
> 
> I've sent the midi dump several times, and it just sits at zero.  The 
> countdown from 10 to zero never happens...


I solved my own issue,  I used another app and slowed down the transfer 
rate.  This seemed to do it.

Re: New 3.0 update for Evolver - It's COOL!

2005-08-17 by tomw97

I had a similar problem - couldn't get Midi-Ox to send the sysex.
Wrote to Dave and he wasn't sure what the problem was, eventually I
used Cubase to send it and it was fine. 
The upgrade is fantastic - definitely worth $25 to get the thing
working with my BCF2000 controller - oscillator levels and filter
freqs on faders, knobs for feedback, distortion etc.  
Even if you don't spend money on the chip, there are two complete new
sets of Evo patches (v.3 and the PEK patches) which are really good,
and more logically arranged than the previous patches. 
Thanks, Dave! 


--- In DSI_Evolver@yahoogroups.com, Robert Krueger <rkr1@t...> wrote:
Show quoted textHide quoted text
> Robert Krueger wrote:
> > Hi all,
> > 
> > I've recieved my Evolver upgrade for 3.0.  The instructions state to 
> > update the DSP software first by loading the 3.0 sysex software.  The 
> > directions state that a countdown on screen will begin from 58 to 0 
> > during the midi dump,  then a countdown from 10 to zero as it updates 
> > the flash.....
> > 
> > I've sent the midi dump several times, and it just sits at zero.  The 
> > countdown from 10 to zero never happens...
> 
> 
> I solved my own issue,  I used another app and slowed down the transfer 
> rate.  This seemed to do it.

RE: [Evolver] Re: New 3.0 update for Evolver - It's COOL!

2005-08-17 by Gene Schwartz

I initially could not get MidiOX to work. I eventually did by disconnecting
all but the Evolver MIDI connection. As to exactly why that worked, I'm not
sure.
Show quoted textHide quoted text
-----Original Message-----
From: DSI_Evolver@yahoogroups.com [mailto:DSI_Evolver@yahoogroups.com]On
Behalf Of tomw97
Sent: Wednesday, August 17, 2005 5:39 AM
To: DSI_Evolver@yahoogroups.com
Subject: [Evolver] Re: New 3.0 update for Evolver - It's COOL!


I had a similar problem - couldn't get Midi-Ox to send the sysex.
Wrote to Dave and he wasn't sure what the problem was, eventually I
used Cubase to send it and it was fine.
The upgrade is fantastic - definitely worth $25 to get the thing
working with my BCF2000 controller - oscillator levels and filter
freqs on faders, knobs for feedback, distortion etc.
Even if you don't spend money on the chip, there are two complete new
sets of Evo patches (v.3 and the PEK patches) which are really good,
and more logically arranged than the previous patches.
Thanks, Dave!


--- In DSI_Evolver@yahoogroups.com, Robert Krueger <rkr1@t...> wrote:
> Robert Krueger wrote:
> > Hi all,
> >
> > I've recieved my Evolver upgrade for 3.0.  The instructions state to
> > update the DSP software first by loading the 3.0 sysex software.  The
> > directions state that a countdown on screen will begin from 58 to 0
> > during the midi dump,  then a countdown from 10 to zero as it updates
> > the flash.....
> >
> > I've sent the midi dump several times, and it just sits at zero.  The
> > countdown from 10 to zero never happens...
>
>
> I solved my own issue,  I used another app and slowed down the transfer
> rate.  This seemed to do it.







Yahoo! Groups Links

RE: [Evolver] Re: New 3.0 update for Evolver - It's COOL! - FIX

2005-08-17 by Don Gothard

I had a similar problem with Midi-OX, and found a solution. The problem
appears to be that Midi-OX sends the sysex data faster than the Evo can keep
up. To solve it if you go on the menu of the sysex window in midi-OX and
choose sysex configure and up the delay value from 60 to 120ms it will work.

BTW The update is cool, the Midi CC's are just what I needed.

Don
Show quoted textHide quoted text
> -----Original Message-----
> From: DSI_Evolver@yahoogroups.com 
> [mailto:DSI_Evolver@yahoogroups.com] On Behalf Of tomw97
> Sent: Wednesday, August 17, 2005 7:39 AM
> To: DSI_Evolver@yahoogroups.com
> Subject: [Evolver] Re: New 3.0 update for Evolver - It's COOL!
> 
> I had a similar problem - couldn't get Midi-Ox to send the sysex.
> Wrote to Dave and he wasn't sure what the problem was, 
> eventually I used Cubase to send it and it was fine. 
> The upgrade is fantastic - definitely worth $25 to get the 
> thing working with my BCF2000 controller - oscillator levels 
> and filter freqs on faders, knobs for feedback, distortion etc.  
> Even if you don't spend money on the chip, there are two 
> complete new sets of Evo patches (v.3 and the PEK patches) 
> which are really good, and more logically arranged than the 
> previous patches. 
> Thanks, Dave! 
> 
> 
> --- In DSI_Evolver@yahoogroups.com, Robert Krueger <rkr1@t...> wrote:
> > Robert Krueger wrote:
> > > Hi all,
> > > 
> > > I've recieved my Evolver upgrade for 3.0.  The 
> instructions state to 
> > > update the DSP software first by loading the 3.0 sysex software.  
> > > The directions state that a countdown on screen will 
> begin from 58 
> > > to 0 during the midi dump,  then a countdown from 10 to 
> zero as it 
> > > updates the flash.....
> > > 
> > > I've sent the midi dump several times, and it just sits at zero.  
> > > The countdown from 10 to zero never happens...
> > 
> > 
> > I solved my own issue,  I used another app and slowed down the 
> > transfer rate.  This seemed to do it.
> 
> 
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor 
> --------------------~--> <font face=arial size=-1><a 
> href="http://us.ard.yahoo.com/SIG=12h209bg5/M=362335.6886442.7
> 839733.3022183/D=grplch/S=1705032144:TM/Y=YAHOO/EXP=1124289532
> /A=2894366/R=0/SIG=138c78jl6/*http://www.networkforgood.org/to
> pics/arts_culture/?source=YAHOO&cmpgn=GRP&RTP=http://groups.ya
> hoo.com/">What would our lives be like without music, dance, 
> and theater? Donate or volunteer in the arts today at Network 
> for Good</a>.</font> 
> --------------------------------------------------------------
> ------~-> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
>

RE: [Evolver] Re: New 3.0 update for Evolver - It's COOL! - FIX

2005-08-17 by implode7@comcast.net

Sorry, but this most definitely did NOT work for me. The problem seemed to be that I had several connections. This seemed to be confusing the transmission in some way. Disconnecting all but the simple midi-OX to Evolver connection worked - in other words, changing the transmission settings was not sufficient.
Show quoted textHide quoted text
> I had a similar problem with Midi-OX, and found a solution. The problem
> appears to be that Midi-OX sends the sysex data faster than the Evo can keep
> up. To solve it if you go on the menu of the sysex window in midi-OX and
> choose sysex configure and up the delay value from 60 to 120ms it will work.
> 
> BTW The update is cool, the Midi CC's are just what I needed.
> 
> Don
>  
> 
> > -----Original Message-----
> > From: DSI_Evolver@yahoogroups.com 
> > [mailto:DSI_Evolver@yahoogroups.com] On Behalf Of tomw97
> > Sent: Wednesday, August 17, 2005 7:39 AM
> > To: DSI_Evolver@yahoogroups.com
> > Subject: [Evolver] Re: New 3.0 update for Evolver - It's COOL!
> > 
> > I had a similar problem - couldn't get Midi-Ox to send the sysex.
> > Wrote to Dave and he wasn't sure what the problem was, 
> > eventually I used Cubase to send it and it was fine. 
> > The upgrade is fantastic - definitely worth $25 to get the 
> > thing working with my BCF2000 controller - oscillator levels 
> > and filter freqs on faders, knobs for feedback, distortion etc.  
> > Even if you don't spend money on the chip, there are two 
> > complete new sets of Evo patches (v.3 and the PEK patches) 
> > which are really good, and more logically arranged than the 
> > previous patches. 
> > Thanks, Dave! 
> > 
> > 
> > --- In DSI_Evolver@yahoogroups.com, Robert Krueger <rkr1@t...> wrote:
> > > Robert Krueger wrote:
> > > > Hi all,
> > > > 
> > > > I've recieved my Evolver upgrade for 3.0.  The 
> > instructions state to 
> > > > update the DSP software first by loading the 3.0 sysex software.  
> > > > The directions state that a countdown on screen will 
> > begin from 58 
> > > > to 0 during the midi dump,  then a countdown from 10 to 
> > zero as it 
> > > > updates the flash.....
> > > > 
> > > > I've sent the midi dump several times, and it just sits at zero.  
> > > > The countdown from 10 to zero never happens...
> > > 
> > > 
> > > I solved my own issue,  I used another app and slowed down the 
> > > transfer rate.  This seemed to do it.
> > 
> > 
> > 
> > 
> > 
> > ------------------------ Yahoo! Groups Sponsor 
> > --------------------~--> <font face=arial size=-1><a 
> > href="http://us.ard.yahoo.com/SIG=12h209bg5/M=362335.6886442.7
> > 839733.3022183/D=grplch/S=1705032144:TM/Y=YAHOO/EXP=1124289532
> > /A=2894366/R=0/SIG=138c78jl6/*http://www.networkforgood.org/to
> > pics/arts_culture/?source=YAHOO&cmpgn=GRP&RTP=http://groups.ya
> > hoo.com/">What would our lives be like without music, dance, 
> > and theater? Donate or volunteer in the arts today at Network 
> > for Good</a>.</font> 
> > --------------------------------------------------------------
> > ------~-> 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> > 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
>

Re: [Evolver] Re: New 3.0 update for Evolver - It's COOL! - FIX

2005-08-17 by Robert Krueger

>>I had a similar problem with Midi-OX, and found a solution. The problem
>>appears to be that Midi-OX sends the sysex data faster than the Evo can keep
>>up. To solve it if you go on the menu of the sysex window in midi-OX and
>>choose sysex configure and up the delay value from 60 to 120ms it will work.
>>
>>BTW The update is cool, the Midi CC's are just what I needed.


that was exactly my issue

Re: [Evolver] Re: New 3.0 update for Evolver - It's COOL! - FIX

2005-08-17 by mr julian

From: "Don Gothard" <gothard@...>

> BTW The update is cool, the Midi CC's are just what I needed.
>
well, I've just ordered my evo upgrade!
Not sure if I'm really going to use the CCs that much, but I'm sure they'll
come in handy enough to be worth US$25. And kudos to dave for picking lots
of useful parameters while he was at it! You could have a bit of fun with a
MIDI LFO and a couple of these things.

I think the biggest bonus is going to be the new feature where the sequencer
is removed from changing parameter values when it's not active.....
finally!!!



julian

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.