Dave Smith Instruments SYNTHESIZERS

Midi-OX does midi through from any input port to any output port.
If the program is too complicated, you can download for example the free
PulseEditor from
http://www.geocities.com/SiliconValley/Campus/6501/

It has a very simple midi setup section and the program isn't interested at
all if it routes midi through to a Pulse or to an Evolver ;-)

Regards
Stefan



----- Original Message -----

From: "rickyannotta" <rickyannotta@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Thursday, June 05, 2003 4:44 PM
Subject: [Evolver] Re: that syncing feeling....


> Is there a shareware type program that will enable your computer to
> act as a midi thru? I have a feeling midi-ox or midi yoke, but wasn't
> able to tell from their website...too complicated for my simple mind.
> I don't have a real audio/midi sequencer (like to get sonar 2.2
> eventually) as of yet and what I'm using doesn't let me midi thru to
> the evolver.
> Thanks,
>
> Rick
>
>
> --- In DSI_Evolver@yahoogroups.com, graeme <doghead61@y...> wrote:
> > a midi merge or splitter would do the job (splitter is cheaper),
> but, i'm assuming yer running some kinda midi sequencing s/w ??
> > i only know Logic, but, reckon it may apply - there should be a
> setting in yer s/w seq to enable a *soft* midi thru.
> >
> > I have the following set up on my lappy:
> > controller k/b midi out --> pc midi in --> [s/w seq midi thru]
> > then, pc midi out --> wee blue beastie midi in
> >
> > (my set up is actually more complex but that's the gist of it!)
> > you can then select the DSI from yer arrange page of the midi seq
> and then (assuming all the channels are correctly set up in s/w)
> playing the k/b will trigger the DSI via the sequencer (and, if
> *record* is enabled also record the playing as midi data) the only
> drawback with this simple set up is tha there's no recording of DSI
> knob tweakings but otherwise works well.
> > Graeme
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Free online calendar with sync to Outlook(TM).
>
>
>       Yahoo! Groups Sponsor
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> DSI_Evolver-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>

I just downloaded midi-ox and figured it out, it was pretty simple 
actually.  My final problem is that I noticed that midi transmission 
seems slow, causing evolver to skip notes that I play on the 
controller (hope I explained that right). Any midi-ox users have any 
experience with this problem? My midi interface is an audiophile USB 
soundcard from m-audio. I don't have this problem if I plug the 
controller directly into evolver, but that's probably a given. 

Thanks,
-Rick




--- In DSI_Evolver@yahoogroups.com, trippler@t... wrote:
> Midi-OX does midi through from any input port to any output port.
> If the program is too complicated, you can download for example the 
free
> PulseEditor from
> http://www.geocities.com/SiliconValley/Campus/6501/
> 
> It has a very simple midi setup section and the program isn't 
interested at
> all if it routes midi through to a Pulse or to an Evolver ;-)
> 
> Regards
> Stefan
> 
> 
> 
> ----- Original Message -----
> From: "rickyannotta" <rickyannotta@y...>
> To: <DSI_Evolver@yahoogroups.com>
> Sent: Thursday, June 05, 2003 4:44 PM
> Subject: [Evolver] Re: that syncing feeling....
> 
> 
> > Is there a shareware type program that will enable your computer 
to
> > act as a midi thru? I have a feeling midi-ox or midi yoke, but 
wasn't
> > able to tell from their website...too complicated for my simple 
mind.
> > I don't have a real audio/midi sequencer (like to get sonar 2.2
> > eventually) as of yet and what I'm using doesn't let me midi thru 
to
> > the evolver.
> > Thanks,
> >
> > Rick
> >
> >
> > --- In DSI_Evolver@yahoogroups.com, graeme <doghead61@y...> wrote:
> > > a midi merge or splitter would do the job (splitter is cheaper),
> > but, i'm assuming yer running some kinda midi sequencing s/w ??
> > > i only know Logic, but, reckon it may apply - there should be a
> > setting in yer s/w seq to enable a *soft* midi thru.
> > >
> > > I have the following set up on my lappy:
> > > controller k/b midi out --> pc midi in --> [s/w seq midi thru]
> > > then, pc midi out --> wee blue beastie midi in
> > >
> > > (my set up is actually more complex but that's the gist of it!)
> > > you can then select the DSI from yer arrange page of the midi 
seq
> > and then (assuming all the channels are correctly set up in s/w)
> > playing the k/b will trigger the DSI via the sequencer (and, if
> > *record* is enabled also record the playing as midi data) the only
> > drawback with this simple set up is tha there's no recording of 
DSI
> > knob tweakings but otherwise works well.
> > > Graeme
> > >
> > >
> > >
> > >
> > >
> > >
> > > ---------------------------------
> > > Do you Yahoo!?
> > > Free online calendar with sync to Outlook(TM).
> >
> >
> >       Yahoo! Groups Sponsor
> >
> >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > DSI_Evolver-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.
> >