Dave Smith Instruments SYNTHESIZERS

Hmm.. too bad. I got the same problem, though I did not try the deoxit.
Thinking of upgrading to the pot edition, anyway. This will be fxxing expensive, but my pek will be even better then. And hold its value anyway :)


--- In DSI_Evolver@yahoogroups.com, Philippe Nocq <philippe.nocq@...> wrote:
>
> I did it for two times now , it works few month and the encoders failed
> again for the second time ...
> I wrote to Dave Smith Instrument to explain the problem and they answored to
> me that i had to send
> the four cards back to the factory, they will replace them with new ones for
> 75 $ in fact i¹m out of warranty
> They offer me to replace the encoders cards by potentiometers cards for
> about 300$
> 
> 
> Le 11/09/10 18:26, « dustin sedlacek » <dustin.sedlacek@...> a écrit :
> 
> >  
> >  
> >  
> >    
> > 
> > Yes, the deoxidizer works great. It takes about an hour to open the synth
> > apply the liquid to each knob and give the knob a twist. I would suggest
> > contacting DSI directly, they will give you specific instructions and even
> > send you the deoxidizer. 
> > 
> > On Sat, Sep 11, 2010 at 10:48 AM, williamzandwilliamz
> > <williamsandwilliams@...> wrote:
> >>   
> >>  
> >>  
> >>    
> >> 
> >> does anyone know how to fix the rotary encoder problem that most of the dsi
> >> synths suffer from? i heard about some sort of spray that might help. is
> >> there a previous post here that might describe the process? any insight on
> >> the matter would be much appreciated
> >> 
> >>  
> >>    
> >>  
> > 
> >
>