Dave Smith Instruments SYNTHESIZERS

Have you tried a  trigger setting of  NnC.?

According to the v3 manual it :
"Plays one step of the sequencer on each key hit. AUTO"

peace,

jmw



On Oct 25, 2007, at 11:40 AM, bdotodotx wrote:

> I am using Ableton Live as a sequencing source for the Desktop
> Evolver. I would like to use the wave shape sequence feature on the
> Evolver for variable sounds throughout a sequence. I have tested all
> settings on the Midi Clock on the Evolver and the results I get are
> not satisfactory. If the setting is off the shape sequence does not
> work. If the setting is "in", the Evolver Sequencer steps through the
> various shapes triggering sounds on every step. This is not what I
> want since the Ableton sequence does not have a trigger on every step.
> So, the problem is that when I have silence on a step in my Ableton
> Sequence, the Evolver sequencer then triggers a sound irregardless. I
> suppose I could turn the wave shape to off on that particular step,
> but that would entail Evolver programming for each sequence that I
> have created in Ableton and for sequences greater than 16 steps that I
> can create in Ableton I would not be able to mimic on the Evolver.
> What would be ideal is that the wave shapes are only triggered via the
> Evolver when there is a midi note signal sent from the external
> sequencer, and when there is not a signal sent then the Evolver would
> step silently over that sequence step. Is this possible?
>
> I hope this makes sense. Can someone help?
>
> Thanks
>
> bdotodotx
>
>
>