Dave Smith Instruments SYNTHESIZERS

> My routing: Evo In/out: Midex 1 in/out, Novation Remote set as
> "keyboard" under midi settings in the ST editor.  Thats it

That's my setting too.
Works perfectly.

----- Original Message ----- 
From: "altitude909" <altitude@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Wednesday, November 30, 2005 10:34 PM
Subject: [Evolver] Re: Soundtower Update


> Sounds like your routing may be at issue.  I use the 3.0 software with
> my Remote 25 and the CC's work perfectly (in fact I am using the
> template offered here).
> 
> My routing: Evo In/out: Midex 1 in/out, Novation Remote set as
> "keyboard" under midi settings in the ST editor.  Thats it
> 
> -alt
> 
> --- In DSI_Evolver@yahoogroups.com, "rickyannotta" <rickyannotta@y...>
> wrote:
>>
>> 
>> Stephan - thanks for your insight.
>> The thing is, if the editor is responding to Evolver's front panel 
>> (in realtime), then "echo'd" cc#'s should logically be working. 
>> HHMmmmm...
>>        
>> The great thing about the Remote is not only does Midi(2x)/USB work 
>> at the same time, but you have lots of control over *where* midi 
>> data is routed as well for each I/O. Well thought out gear, but 
>> things can get confusing too...I will check a few things tonight 
>> with a fine tooth comb.
>> 
>> 
>> --- In DSI_Evolver@yahoogroups.com, "Stefan Trippler" <doct@o...> 
>> wrote:
>> >
>> > Rick, the controller thing works for me, values in the editor are 
>> updated as 
>> > well as in the Evolver if I turn knobs on my BCR2000.
>> > 
>> > Maybe the problem is in your midi chain. Are you sure that the 
>> Remote send 
>> > the controllers to both Midi Out and USB at a time ? If yes the 
>> problem may 
>> > also be in the editor.
>> > I can imagine that the editor might not exploit middi CCs 
>> directly, but 
>> > reacts on the echoed Sysex data from the Evolver. In this case 
>> your setup 
>> > wouldn't work.
>> > 
>> > Regards
>> > Stefan
>> > 
>> > ----- Original Message ----- 
>> > From: "rickyannotta" <rickyannotta@y...>
>> > To: <DSI_Evolver@yahoogroups.com>
>> > Sent: Wednesday, November 30, 2005 5:41 PM
>> > Subject: [Evolver] Re: Soundtower Update
>> > 
>> > 
>> > > Okay - contacted soundtower...wait & see what happens. In the
>> > > meantime if anyone has tested the editor responding to CC#'s
>> > > automatically let me know. I would love to start programming with
>> > > the editor via my Novation Remote for cetain things (sliders work
>> > > better for envelope's than knobs).
>> > >
>> > > Here's my routing:
>> > > Evolver Midi Out > Remote Midi In #1 > Remote USB Out > Editor In
>> > > Editor Out > Remote USB In > Remote Midi Out #1 > Evolver Midi
>> > > in
>> > >
>> > >
>> > > --- In DSI_Evolver@yahoogroups.com, "rickyannotta"
>> > > <rickyannotta@y...> wrote:
>> > >>
>> > >>
>> > >> Just installed the 3.0 update and I can't get the editor to 
>> update
>> > > CC#
>> > >> parameters in realtime (for ex. I turn a knob on my controller
>> > >> assigned to a CC#, the Evo responds, but the editor does not
>> > > respond).
>> > >>  Just wondering if anyone tried before I contacted soundtower.
>> > >>
>> > >> Thanks
>> > >>
>> > >> Rick
>> > >>
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > Yahoo! Groups Links
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> >
>>
> 
> 
> 
> 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
>