The article is pretty long so it is going to be
though to streamline. Basically, they say sounddiver ( a 'generic'
labrarian/sound editor) has rather powerful tools to generate your own wave.
Otherwise, there's another program called microwave that does the job too but at
a lesser level. I guess you should go and ask the microwave users list, they
seem to be pretty enthousiastic in general
----- Original Message -----From: SimonSent: Monday, January 06, 2003 2:58 PMSubject: Re: [Evolver] Wavetable editor?>There is an excellent Masterclass on the microwave wavetables in the latest
>'sound on sound' if u'r interested.
I am interested, but I can't access the website to read it, as that
article is for subscribers only. The latest issue in Australia is
always a couple of months behind UK release, I can't buy it here yet.
Could you provide a little detail on what they say. Is it useful? Are
there dedicated editors or do you load it into a soundfile editor?
>I guess the answer to most of your
>questions is yes but being only a lurker so far (don't own an evolver yet) I
>don't know what kind of uploading capabilities it has.
From the user manual, wavetable data dump specs...
Waveshape Data Dump
Status Description
1111 0000 System Exclusive (SysEx)
0000 0001 DSI ID
0010 0000 Evolver ID
0000 0001 File Version
0000 1010 Waveshape Data
0vvv vvvv Waveshape number, 0 - 127, corresponds to Waveshapes 1 -
128. Only Waveshapes 96 - 127 can be sent to Evolver and saved as
user programmable; others will be ignored.
0vvv vvvv 293 bytes in "packed MS bit" format (see next page). The
293 bytes = 256 data bytes, in the format of MS byte/LS byte, for the
128 16-bit words that make up a waveshape. The ROM Waveshapes are 12
bit two's complement (to match the VS), but the User Waveshapes (97 -
128) can be a full 16 bits.
1111 0111 End of Exclusive (EOX)
I am wondering if these wavetables could be loaded into something
like a wavetable editor designed for the microwave or similar
wavetable synth.
Thanks,
Simon
Canberra
AUSTRALIA
To unsubscribe from this group, send an email to:
DSI_Evolver-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.