Dave Smith Instruments SYNTHESIZERS

In MIDI-OX, click the Options > Configure Buffers menu/command.  In 
the resulting "Configure SysEx Buffers" dialog box, set the "Low 
Level Output Buffers" as follows:

Size: 1,024 Bytes
 Num: 128

This should take care of your problem.  Do note that with more and 
larger buffers, MIDI-OX is going to be finished sending the SysEx 
messages long before the Evolver is done processing them.  Make sure 
to let the Evolver finish the upgrade process as described in Dave's 
document.

Also make very sure that the Evolver is not powered off during this 
procedure (again, as cautioned in Dave's document).  I highly 
recommend the use of a UPS, especially if you live in an area that 
has dodgey power.

(This info is posted at EX5Tech as well, should you need it again in 
the future, and find that it's been deleted here.)


Ski
www.ex5tech.com
EX5Tech Evolver forum:
http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23



--- In DSI_Evolver@yahoogroups.com, "Stefan Weber" <skew@g...> wrote:
> Hi,
> 
> I envy you all already teasting beta 1.5 as I'm having problems 
transferring
> the sysex-files to the synth. After installing Mid-Ox (which went 
perfectly)
> I followed ski's instructions on downloading the files (thank you 
for
> instructing, ski!). The transmission of data began ok but about 
half way through an
> error message occured reading: "SysEx Output Devices: 
MMSYSTEM067..." and
> something like data are being transmitted to the device; repeat the 
procedure
> as soon as the transmission is completed. This does not make sense 
to me so I
> am wondering if someone had the same problem?
> 
> Thanks a lot, Stefan.
> 
>                       
> 
> -- 
> NEU FÜR ALLE - GMX MediaCenter - für Fotos, Musik, Dateien...
> Fotoalbum, File Sharing, MMS, Multimedia-Gruß, GMX FotoService
> 
> Jetzt kostenlos anmelden unter http://www.gmx.net
> 
> +++ GMX - die erste Adresse für Mail, Message, More! +++