Casio FZ Samplers group photo

Yahoo Groups archive

Casio FZ Samplers

Index last updated: 2026-04-28 22:42 UTC

Message

Re: Casio FZ1 Display Woes

2014-11-15 by eliasmacpherson@...

> According to the manual if I go to the modify menu, it is four downward button pushes then enter, then in the DUMP menu four further downward button presses then enter. Then move the data slider down to tell the FZ to accept a midi connection, then one more downward button press to set it to remote control.

this is incorrect.

When the FZ boots, the default is "DISK" in the select device screen. It is position 0. position 1 is PORT and position 2 is MIDI. You must press the "YES" button which doubles as an up arrow two times, instead of moving the slider down.

The slider when is at its topmost value -> moving down will decrease the position. since the position is already 0, moving down will not do anything.

When the slider is at the bottom value moving the slider UP may set it to MIDI but this is less accurate than pressing "YES, YES".

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.