Yahoo Groups archive
Thread
2017-01-16 by seanober@...
Won't seem to boot up.
Replaced PSU Caps, Battery but still a no-go. Any ideas appreciated. btw, I can select "initialize" at boot but freezes during that as well.
Thank you, Sean Dab
2017-01-17 by Daniel Forró
Are you sure the battery is OK, and connected properly as for polarity? Are you sure no cable or connector inside was not disconnected, not perfectly connected or misconnected? Are you sure you perform System Initialize according to Service Manual? Daniel Forro
On Jan 17, 2017, at 4:04 AM, seanober@... [CZsynth] wrote: > Won't seem to boot up. > > Replaced PSU Caps, Battery but still a no-go. Any ideas > appreciated. btw, I can select "initialize" at boot but freezes > during that as well. >
2017-01-17 by Sean Ober
Yup, tried all the above and it's still frozen. Everything was working fine and it just froze one day. Since, replace battery, PSU caps, voltages okay, etc. I wonder if there was a spike and those old caps didn't react properly, due to age. I wonder what might go out next after PSU?
On Monday, January 16, 2017 7:16 PM, "Daniel Forró danforcz@... [CZsynth]" <CZsynth@yahoogroups.com> wrote:
Are you sure the battery is OK, and connected properly as for polarity?
Are you sure no cable or connector inside was not disconnected, not perfectly connected or misconnected?
Are you sure you perform System Initialize according to Service Manual?
Daniel Forro
On Jan 17, 2017, at 4:04 AM, seanober@yahoo.com [CZsynth] wrote:
Won't seem to boot up.Replaced PSU Caps, Battery but still a no-go. Any ideas appreciated. btw, I can select "initialize" at boot but freezes during that as well.2017-01-20 by José Ángel Morente
Yup, tried all the above and it's still frozen. Everything was working fine and it just froze one day. Since, replace battery, PSU caps, voltages okay, etc. I wonder if there was a spike and those old caps didn't react properly, due to age. I wonder what might go out next after PSU?On Monday, January 16, 2017 7:16 PM, "Daniel Forró danforcz@... [CZsynth]" <CZsynth@yahoogroups.com> wrote:
Are you sure the battery is OK, and connected properly as for polarity?Are you sure no cable or connector inside was not disconnected, not perfectly connected or misconnected?Are you sure you perform System Initialize according to Service Manual?Daniel ForroOn Jan 17, 2017, at 4:04 AM, seanober@... [CZsynth] wrote:Won't seem to boot up.Replaced PSU Caps, Battery but still a no-go. Any ideas appreciated. btw, I can select "initialize" at boot but freezes during that as well.
2017-01-21 by bill bigrig
Try turning it on and leaving it for a while, then turn it off overnight, then back on. I've noticed synths from this vintage sometimes come back to life incrementally. I know, it sounds wrong, but I've had several of them do this.Rig
On Thursday, January 19, 2017 8:22 PM, "Sean Ober seanober@yahoo.com [CZsynth]" <CZsynth@yahoogroups.com> wrote:
Yup, tried all the above and it's still frozen. Everything was working fine and it just froze one day. Since, replace battery, PSU caps, voltages okay, etc. I wonder if there was a spike and those old caps didn't react properly, due to age. I wonder what might go out next after PSU?
On Monday, January 16, 2017 7:16 PM, "Daniel Forró danforcz@yahoo.com [CZsynth]" <CZsynth@yahoogroups.com> wrote:
Are you sure the battery is OK, and connected properly as for polarity?
Are you sure no cable or connector inside was not disconnected, not perfectly connected or misconnected?
Are you sure you perform System Initialize according to Service Manual?
Daniel Forro
On Jan 17, 2017, at 4:04 AM, seanober@... [CZsynth] wrote:
Won't seem to boot up.Replaced PSU Caps, Battery but still a no-go. Any ideas appreciated. btw, I can select "initialize" at boot but freezes during that as well.