Casio CZ/ VZ/ FZ - Pro Series

Have you tried physically looking at the parameter values that are stored and checking them against the original - I believe there is a COMPARE function on CZs....if the data is not the same then it maybe possible to figure out what has happened.

--- On Tue, 26/7/11, Mike <antebios1153@...> wrote:

From: Mike <antebios1153@...>
Subject: [CZsynth] Re: CZ3000 Problems
To: CZsynth@yahoogroups.com
Date: Tuesday, 26 July, 2011, 22:06















 
 



  


    
      
      
      It must be something else. I get no sound from any of the patches I select from the cartridge. I guess it thinks it's writing to the cartridge, but it really isn't.



--- In CZsynth@yahoogroups.com, "narfman96" <narfman96@...> wrote:

>

> This is true all the way up to the CZ5000. Only the CZ1 displays patch names from an INTERNAL or CARTRIDGE patch.

> 

> I've been wondering why many of my recent posts here in the groups have been missing or delayed by several days. Yahoo said it was a server problem and they think they have it fixed....

> 

> --- In CZsynth@yahoogroups.com, Lee Borrell <templarser@> wrote:

> >

> > I cannot swear to the 3000 - but the 101 and 1000 do not show anything other than the location name on the cartridge - that is the ROM based ones give a patch name in the display,but the RAM ones do not. The user storage areas INTERNAL and CARTRIDGE are listed as such - but there is no preset name.The only way to tell if a preset is saved is to play it. This may of course be different on the 3000.

> > 

> > --- On Tue, 19/7/11, Mike <antebios1153@> wrote:

> > 

> > From: Mike <antebios1153@>

> > Subject: [CZsynth] CZ3000 Problems

> > To: CZsynth@yahoogroups.com

> > Date: Tuesday, 19 July, 2011, 3:36

>     

> >       Hello all, I need a little help. I have a CZ3000 that I haven't used in a while. I'm trying to save off the internal Timbre's to a cartridge. I have 5 RA-3 cartridges. I press  the cartridge key and it asks me cartridge save or load? I then respond save and is asks me bank A,B (Y/N)? So I respond Yes and it looks  like it's writing to the cartridge after a couple of seconds the display says Bank A,B OK. I check it by pushing the memory Bank A key then the 1, but it just says memory A1, or A2, or A3 etc.... like nothing was written to it. I have tried several cartridges and no luck. Can anyone tell me what I'm doing wrong?

>  

> > Thanks.

>





    
     

    
    


 



  










[Non-text portions of this message have been removed]