Casio CZ/ VZ/ FZ - Pro Series

well, cleaning the switches didn't do much good.
looks like i'll have to replace all of the contacts on the control 
panel:(
would anyone have a ballpark figure on what something like that would 
cost?






--- In CZsynth@yahoogroups.com, "Bryan Holland" <stingerholland@...> 
wrote:
>
> -Thanks for the advice mike, but i've already done that.
> it will initialize just fine, but i am still having problems.  this 
> weekend i plan on taking the control panel apart and cleaning all 
the 
> contacts.  maybe this will do something
> bryan
> 
> 
> 
> 
> -- In CZsynth@yahoogroups.com, "Fulfil Objective" <kasploosh@> 
> wrote:
> >
> > There's still hope, since it sounds like you haven't initialized 
the
> > whole system yet.  Here's the procedure to reset the data for the
> > entire keyboard.
> > 
> > 1. Turn the CZ-1 off.
> > 2. Hold down the INITIALIZE button.
> > 3. While still pressing the initialize button, turn CZ-1 on.
> > 4. LCD will ask "SYSTEM ALL INITIALIZE (Y/N)?" Keep holding the
> > INITIALIZE button and also press the YES button.
> > 5. If all goes well the LCD will say "SYSTEM INITIALIZED !!"
> > 
> > This could clear up a lot of problems you are having.  This is 
> really
> > the first thing to do when getting a CZ out of storage, I think.
> > 
> > m¡ke
> > 
> > 
> > 
> >>
>