Boss VF-1 Effect Processor

Below you can read the textfile belonging to the upgrade.
I upgraded my VF-1 a couple weeks ago, this textfile came along with the
download of 15 midifiles, yes 15.
I quess there is no Standard Midi File nr. 15, the text mentions in the 3rd
sentence (see below):"The updated software is provided as 15 Standard Midi
Files".

Along with this text file I dowloaded 15 midifiles, nr. 1-14 and 16.
I've used them and I've upgraded succesfully my VF-1 version 1.00 to 1.12.

Sjaak de Vos

Roland Corp. text file:
----------------------------
Updating the VF-1 Operating System from Standard MIDI Files

Use the following procedure to update the VF-1 to the current
operating system. The updated software is provided as 15
Standard MIDI Files.

The tools required are:
* MIDI sequencer (software or hardware) that can load
  Standard MIDI Files
* MIDI cable
* VF-1
* VF-1 System Software update files

CAUTION!
Do not turn off the VF-1 during system software updating.
This can damage the machine.

Update Procedure

1. Connect the MIDI OUT of the sequencer to the MIDI IN
   of the VF-1.
2. Hold down WRITE button and PARAMETER LEFT[<] button
   while powering on the VF-1. The message
   "Flash Update" will be displayed.
3. Load the Standard MIDI Files into your sequencer.
4. Play all Standard MIDI Files: "vf1-01.MID" through
   "vf1-16.MID" in sequential order.
5. After all SMF's have been played into the VF-1, the
   message "NOW initializing! TURN OFF, After 40 seconds."
   will be displayed.
6. Wait 40 seconds,and Restart the VF-1
   (power off and then on again).

Checking the version number

While holding down the [ENTER] button, turn on the power
of the VF-1. The message "VF-1 Ver 1.10" will be displayed.
The version number will appear in the LCD for approximately
five seconds.

(c)2001 Roland Corporation U.S.
-----Oorspronkelijk bericht-----
Van: camuciol@... <camuciol@...>
Aan: BossVF1@yahoogroups.com <BossVF1@yahoogroups.com>
Datum: maandag 3 september 2001 2:02
Onderwerp: [BossVF1] To Markus

>Hi Markus,
>thank's a lot for your interest on my question : )
>but...your file is still without the file number 15 of the 16 needed.
>I don't know....maybe it's all right...but,I'm fearful...
>Is that file good??? in the readme.txt is wrotten:
>
>"4. Play all Standard MIDI Files: "vf1-01.MID" through
>   "vf1-16.MID" in sequential order."
>
>but we're without the 15....please, excuse me if I'm wrong...
>>
>
>
>

Thank's for all your answer... :)
I've upgraded my vf1 successfully!

Excuse my distraction in reading the readme.txt.....

Regards
Dimitri