AVR-Chat

G'day all

Thanks for the feedback both here and off list.
I have now moved our domain name to the new site
so the address below should work.

Now for the task of making the website 100% Atmel :-)

Regards

John Samperi

******************************************************
                         Ampertronics Pty. Ltd.
   11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
          Tel. (02) 9674-6495       Fax (02) 9674-8745
                Email: samperi@ampertronics.com.au
                  Website  http://www.ampertronics.com.au
* Electronic Design   * Custom Products   * Contract Assembly
******************************************************

John Samperi wrote:

> G'day all
> 
> Thanks for the feedback both here and off list.
> I have now moved our domain name to the new site
> so the address below should work.
> 
> Now for the task of making the website 100% Atmel :-)
> 
> Regards
> 
> John Samperi

Yeah get rid of the moto CRAP !!!!!

I would love the schematic for your PSU :)

Regards,

Kat.


-- 
---------------------------------------------------------------
K.A.Q. Electronics	Website: www.kaqelectronics.dyndns.org
IM: Yahoo: PinkyDwaggy  MSN: katinka@kaqelectronics.dyndns.org
For Everything Electronics     Phone: 0419 923 731
---------------------------------------------------------------	


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.12.2/139 - Release Date: 17/10/2005

At 10:01 AM 19/10/2005, you wrote:
>Yeah get rid of the moto CRAP !!!!!

They all have AVR substitutes now :-) The CONT2 is still
in use as I haven't ported the code across to the new
CONT3 module which uses the M64 (or M128).

The MTERM1 has changed to MTERM2 using a M8 and it comes in
3 or 4 shapes including one with a stereo amp and digital
volume control.

The DXIO2 was never made apart from the first prototype.
It now has the DXIO3 substitute with a M8515 and have made
some of them.

The DIS6-I (---PIC---) has now changed to DIS6-A using
a M8 and it comes in two flavours scrolling and non
scrolling with 6-24 chars each. Making a few of these too.


>I would love the schematic for your PSU :)

Do you mean the switch mode power supply? It is based
on a 'Mature' design from ST around the L4960 and you can
find the schematic on their website. It has been in use for
some 20 years both with my previous employer and for our
own stuff in the past 14 years. It is like an old pair of
shoes. Some new stuff from National looks attractive.

Regards

John Samperi

******************************************************
                         Ampertronics Pty. Ltd.
   11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
          Tel. (02) 9674-6495       Fax (02) 9674-8745
                Email: samperi@ampertronics.com.au
                  Website  http://www.ampertronics.com.au
* Electronic Design   * Custom Products   * Contract Assembly
******************************************************

Your site looks pretty much okay, in fact i like it's neat-ness and
simplicity :p Good on ya :)

It could be nicer if you put in some application notes using one of
your modules. Think of it as another form of promotion :D

All the best.

On 10/19/05, John Samperi <samperi@ampertronics.com.au> wrote:
> At 10:01 AM 19/10/2005, you wrote:
> >Yeah get rid of the moto CRAP !!!!!
>
> They all have AVR substitutes now :-) The CONT2 is still
> in use as I haven't ported the code across to the new
> CONT3 module which uses the M64 (or M128).
>
> The MTERM1 has changed to MTERM2 using a M8 and it comes in
> 3 or 4 shapes including one with a stereo amp and digital
> volume control.
>
> The DXIO2 was never made apart from the first prototype.
> It now has the DXIO3 substitute with a M8515 and have made
> some of them.
>
> The DIS6-I (---PIC---) has now changed to DIS6-A using
> a M8 and it comes in two flavours scrolling and non
> scrolling with 6-24 chars each. Making a few of these too.
>
>
> >I would love the schematic for your PSU :)
>
> Do you mean the switch mode power supply? It is based
> on a 'Mature' design from ST around the L4960 and you can
> find the schematic on their website. It has been in use for
> some 20 years both with my previous employer and for our
> own stuff in the past 14 years. It is like an old pair of
> shoes. Some new stuff from National looks attractive.
>
> Regards
>
> John Samperi
>
> ******************************************************
>                          Ampertronics Pty. Ltd.
>    11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
>           Tel. (02) 9674-6495       Fax (02) 9674-8745
>                 Email: samperi@ampertronics.com.au
>                   Website  http://www.ampertronics.com.au
> * Electronic Design   * Custom Products   * Contract Assembly
> ******************************************************
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>