AVR-Chat

Hi,

I thought you might be interested in the newest project article on my 
website called "Building Circuits for Stripboard using EAGLE". This 
article, first published on 13 June, 2005 describes the process I use 
for building circuits on stripboard (aka Veroboard in Europe). I use 
EAGLE to draw the schematic and help design the circuit layout on 
stripboard. Some of this article may be useful even if you use other 
techniques for building circuits. As an example I build a simple audio 
signal generator and a mono audio amplifier.

Mike

Hi all,

   I'm ditching my cranky Windows laptops and moving to my Macintosh
platform.  I have Bascom/AVR running fine, but it won't detect the
AVRISP device.  For that matter, I've not been able to get AVR
Studio 4 to see the JTAG/ICE MK-II either (But I've never been able
to get it to do anything but the STK500 on Windows, so that's no
surprise.)  Has anyone gotten Bascom/AVR to work on Virtual PC
to see any serial programmer?

I'm using OSX.4, Virtual PC 7 and W2K on the VPC on an iBook.

thanks,
DLC
-- 
---------------------------------------------------------------------
* Dennis Clark  dlc@frii.com http://www.techtoystoday.com             *
* "Programming and Customizing the OOPic Microcontroller" Mcgraw-Hill *
---------------------------------------------------------------------

And the link to my projects page is 
http://home.austin.rr.com/perks/basicx/Projects/

> Hi,
>
> I thought you might be interested in the newest project article on my
> website called "Building Circuits for Stripboard using EAGLE". This
> article, first published on 13 June, 2005 describes the process I use
> for building circuits on stripboard (aka Veroboard in Europe). I use
> EAGLE to draw the schematic and help design the circuit layout on
> stripboard. Some of this article may be useful even if you use other
> techniques for building circuits. As an example I build a simple audio
> signal generator and a mono audio amplifier.
>
> Mike