AVR-Chat

At 09:23 AM 15/04/2013, you wrote:
>There must be a way to use these files on another PC to program ATMega chips
>without installing a copy of Codevision to do it.

AVR Studio as suggested is one choice.

AVRDUDE programmer is another. You can get a GUI for that.

AVROSP II is yet another.

I use a "Keyfob" type programmer loaded up with the files
for production (ie anything more than 2 or 3 boards)

Regards

John Samperi

********************************************************
Ampertronics Pty. Ltd.
11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
Tel. (02) 9674-6495
Website  http://www.ampertronics.com.au
*Electronic Design * Custom Products * Contract Assembly
********************************************************

The STK-500 makes a pretty good programmer, and you can drive it from the
command line to set fuses etc.
The AVRISP same, only smaller.



On Sun, Apr 14, 2013 at 6:19 PM, John Samperi
<samperi@ampertronics.com.au>wrote:

> At 09:23 AM 15/04/2013, you wrote:
> >There must be a way to use these files on another PC to program ATMega
> chips
> >without installing a copy of Codevision to do it.
>
> AVR Studio as suggested is one choice.
>
> AVRDUDE programmer is another. You can get a GUI for that.
>
> AVROSP II is yet another.
>
> I use a "Keyfob" type programmer loaded up with the files
> for production (ie anything more than 2 or 3 boards)
>
> Regards
>
> John Samperi
>
> ********************************************************
> Ampertronics Pty. Ltd.
> 11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
> Tel. (02) 9674-6495
> Website  http://www.ampertronics.com.au
> *Electronic Design * Custom Products * Contract Assembly
> ********************************************************
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>


[Non-text portions of this message have been removed]