AVR-Chat

Hi Jim,

> For now we will solve the conversion from 6 to 10 on our existing boards by crimping a 10 pin header on the 6 pin cable from the MkII.

Hmm. I think I'm missing something. Since the pinouts for the two
connectors are wildly different, I'm not sure how this would work.

Page 5 of this document shows the two pinouts:
http://www.atmel.com/dyn/resources/prod_documents/doc2521.pdf

4 of the 6 pins line up (MISO, SCK, RST and one of the grounds) if you
flip the 10-pin top to bottom.

But it's a bit more than just crimping it on.

-- 
Dave Hylands
Vancouver, BC, Canada
http://www.DaveHylands.com/