AVR-Chat

Hi all,

If I was to release and SBC that has the following, what else would be good.

SPI with 16 chip selects.
Ethernet 10BaseT (100BaseT could be done, but was not needed on this design)
32K sram
128K Flash ROM
LCD PORT
1x RS232 Port.
On board 5V reg.

Connectors for both ISP and Jtag.

Spare pins routed to a connector (7 pins on various ports)

Main Xtal 14.7456Mhz
RTC xtal of 32.768Khz.

Anything else ??

Just have designed this for a customer, but they think it would make a 
good SBC, and are prepared to sell these to the community.


-- 
Regards,

Kat.
---------------------------------------------------------------
  K.A.Q. Electronics     Website: www.kaqelectronics.dyndns.org
  IM: Yahoo: PinkyDwaggy MSN: katinka@kaqelectronics.dyndns.org
  For Everything Electronics 		   Phone: 0419 923 731
---------------------------------------------------------------


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.3.3/298 - Release Date: 30/03/2006