AVR-Chat

Good idea.. 

On Monday 02 January 2006 8:19 pm, stevech wrote:
>  A software-initiated full reset of the AVRs is often done by forcing a
>  watchdog timer timout.
>
>  -----Original Message-----
>  From: AVR-Chat@yahoogroups.com [mailto:AVR-Chat@yahoogroups.com] On Behalf
>  Of Micah Stevens
>  Sent: Monday, January 02, 2006 3:42 PM
>  To: AVR-Chat@yahoogroups.com
>  Subject: Re: [AVR-Chat] Interrupt routine
>
>  Now that I think of it, you'd run through variable initialization as well
>  right after that, so the memory locations should be reset to their initial
>  values needed. At least, that's what I do in ASM. I would assume a C
>  compiler
>  would do the same thing, but I've never paid attention.
>
>  -Micah
>
>  On Monday 02 January 2006 3:36 pm, Zack Widup wrote:
>  >  Your initialization of the chip should include resetting the stack
>  >  pointer.  So if at the end of your interrupt routine you go to the very
>  >  start of the program instead of using "retfie", you're starting
>
>  completeny
>
>  >  new and it shouldn't matter.
>  >
>  >  Zack
>  >
>  >  On Mon, 2 Jan 2006, Moataz Hussein wrote:
>  >  > 
>  >  >   
>  >  >   Thanks all for your advice, I was meaning start of program i.e.
>  > full > reset.
>  >  >   In a book I have it is mentioned
>  >  >   "When an interrupt occurs the value of the program counter is
>  > stored > in the stack so that the program returns to where it was when
>  > the > handling interrupt is over."
>  >  >   So is it correct that going to the start (rjmp start) at the end of
>  >  > the interrupt routine instead of the RETI instruction will not help?
>  >  >   Moataz
>  >
>  > SPONSORED LINKS
>  > Atmel avr   Microcontrollers   Intel microprocessors
>  >   Pic microcontrollers
>  >
>  >
>  > YAHOO! GROUPS LINKS
>  >
>  >
>  >  Visit your group "AVR-Chat" on the web.
>  >  
>  >  To unsubscribe from this group, send an email to:
>  >  AVR-Chat-unsubscribe@yahoogroups.com
>  >  
>  >  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>  Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> SPONSORED LINKS
> Atmel avr   Microcontrollers   Intel microprocessors
>   Pic microcontrollers
>
>
> YAHOO! GROUPS LINKS
>
>
>  Visit your group "AVR-Chat" on the web.
>  
>  To unsubscribe from this group, send an email to:
>  AVR-Chat-unsubscribe@yahoogroups.com
>  
>  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.