AVR-Chat

At 03:23 PM 12/09/2005, you wrote:
>Hi There,
>
>It's possible in Bascom. There is a Lib that an avr can be used as I2C
>slave.


'The Slave library will only work for chips that have T0 and INT0 
connected to the same PORT.
'These chips are : 2313,2323, 2333,2343,4433,tiny22, tiny12,tiny15, M8
'The other chips have build in hardware I2C(slave) support.

So the library seems to be a software I2C for chips that do not
have I2C, but it seems that other chips with I2C built in (M8535?)
can be used as master or slave devices. If anyone with I2C experience
would care to comment......or else I'll have to read the manual :-)


Regards

John Samperi

******************************************************
                         Ampertronics Pty. Ltd.
   11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
          Tel. (02) 9674-6495       Fax (02) 9674-8745
                Email: samperi@ampertronics.com.au
                  Website  http://www.ampertronics.com.au
* Electronic Design   * Custom Products   * Contract Assembly
******************************************************