AVR-Chat

Kathy Quinlan wrote:
> Hi all,
> 
> This is to the AU members.
> 
> where can I get QUALITY PCB's done that do not cost the earth, I have 
> been using Precision Australia, but this latest batch has had about 10 
> PCB's with shorts (most were on 1 pin that was easy to get to, but one 
> has a couple of shorts on the +5V rail :(
> 
> I used to use Jemal, but they do not like doing 10 thou track and gap :(
> 
> I need someone reliable and able to do fine etches as I do not like the 
> price for 4 layer (well I do not care, but customers do ;), so I tend to 
> squeeze it all on 2 layer (things like M128's, 2x Max232's,74vhc08 and 
> SD card all on a PCB 3" x 2").
> 
> Regards,
> 
> Kat.

http://www.melbpc.com.au/

They only do 1 or 2 layer, but 10 thou is done easily IME.