AVR-Chat

As you may have seen from other posts, I am trying to write (and 
then simulate) timer functions.

Currently I have 2 timers running.  Timer 1 runs at a prescale of 1 
and trivvers an output compare avery 16,000 counts (1 millisecond).  
When this runs as the only timer process, it works fine.

I have also set up timer 0 as a slower timer.  Prescale is 1024 and 
it triggers at close to 61hz. I have set up the overflow interrupt 
for this one and it works properly when it, too,  triggers properly.

When the 2 timers are running simultaneously then I get the timer 1 
output compare triggering the timer2 overflow function (I can't tell 
if the code is jumped to, or if there was an interrupt to get there).

It may be a problem with avrstudio and stepping thru a program, or 
maybe with the avr-libc that I am using for the timer128.c routines.

Any suggestions?

-Tony