I believe it's the difference between
void foo();
And
void foo(void);
The first is a function that takes unspecified parameters and the second
is a function that takes no parameters.
-- Paul.
> -----Original Message-----
> From: Chuck Hackett [mailto:egroupscdh@WhiteTrout.net]
> Sent: 08 April 2005 13:13
> To: AVR-Chat@yahoogroups.com
> Subject: [AVR-Chat] Code Conversion
>
>
> I have purchased an ATMega16 based board to connect a project
> to the Internet.
> I'm attempting to compile my first real embedded program.
> The example code that came with the board was written for
> ImageCraft's ICCAVR Pro C compiler and I'm currently
> converting it to WINAVR. I'm trying to digest all the
> documentation but my unfamiliarity with both compilers is
> hampering me. If you would indulge me with a couple of questions:
>
> I have two functions that are being flagged with the
> following warning:
>
> "function declaration isn't a prototype"
>
> One is declared:
>
> void overrun()
> {
> ...
> }
>
> ... and the other ...
>
> void init_ASIX88796L()
> {
> ...
> }
>
> Both functions are declared prior to their first use and
> there are other "void funct()" functions which do not cause warnings.
>
> - What exactly is this trying to tell me?
> - Where can I find descriptions of the various warnings and
> errors from WINAVR?
>
>
> I came across a couple of occurrences of:
>
> do{
> ...
> result = byte_read & RDC;
> }while (result = 0);
>
> Shouldn't "while (result = 0)" be "while (result == 0)" ?
>
>
> If I understand it correctly I should convert the following code:
>
> #pragma interrupt_handler USART_RX_interrupt:iv_USART_RX ...
> void USART_RX_interrupt( void )
> {
> ...
> }
>
> ... to ...
>
> SIGNAL(SIG_USART_RECV)
> {
> ...
> }
>
>
> Are there general guidelines available on the Internet
> concerning converting ImageCraft's ICCAVR Pro C code to WINAVR?
>
> Thanks in advance for your help.
>
> Cheers,
>
> Chuck Hackett
> "Good judgment comes from experience, experience comes from
> bad judgment"
> 7.5" gauge Union Pacific Northern (4-8-4) 844
> http://www.whitetrout.net/Chuck
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>Message
RE: [AVR-Chat] Code Conversion
2005-04-08 by Paul Curtis
Attachments
- No local attachments were found for this message.