AVR-Chat

At 02:23 AM 2/27/2005, John Samperi wrote:

>At 11:54 AM 27/02/2005, you wrote:
> >Studio (latest version) tells me that it can't see the programmer, which is
> >on COM1 a "real" hardware serial port.
>
>As a matter of interest have you got an USB to RS232 converter
>that you can use? I know, I know this sounds crazy....BUT... I have
>had no end of problems with Studio 4.xx WITH A REAL port and ICE200
>but works perfectly with a USB/RS232 converter on 3 different
>computers and 2 different O/S...go and figure that out.

I started out on an Edgeport, which I've used before, for tons of work, but 
had trouble, so I moved back to the "golden oldie".

Still as before, but I'm fried.
Hopefully I've left it in a safe state, I'm going off for a couple hrs sleep.

Biggest irritation now, is the unexplained TXD int on UART0
Chip config says this should not be happening.
That int is disabled, and the uart TX isn't active, and I'm not using that 
uart at all.

CLI/SEI controls it, as expected, at the expense of all ints.