Yahoo Groups archive

AVR-Chat

Index last updated: 2026-04-28 22:41 UTC

Message

RE: [AVR-Chat] Have someone can share example ?

2005-02-19 by wbounce

For a atmega 128 gcc

void initmotor(void)
{
/* use fast PWM mode 10 bit with toggle on compare
Reference pages 130 table 58 
Page 133 table 61 

	f OCn = f clk_I_O
	    	-------------
		     N *  (1 + TOP) 
 f clk_I_O = 16000000

Top can be either 
 ff ( 255)  for mode 5 
1ff ( 511)  for mode 6
3ff (1023) for mode 7
       prescales
Mode	1 		8		64		256
1024
5	   62500  7812.5   976.5   244.1    61
6	   31250  3906.2   488	    122     30
7	   15625  1953     244      61      15

use mode 6 with 8 prescale
*/

// need to set TCCR3A register


// page 130 
// TCCR3B register needs to look like bit 7 - 4 = 0 bit 3 = 1 bit 2 = 0
bits 1 =0 and bit 0 = 1
//ICNC3 ICES3 - WGM33 WGM32 CS32 CS31 CS30 
// 0	0	  0	0		1	0	 0
1

// TCCR3A 
//bit 7 	6 		5 		4 	3
2 	1 		0
//COM3A1 COM3A0 COM3B1 COM3B0 COM3C1 COM3C0 WGM31 WGM30 
//1			0		1	0		0
0	1		1

// turn everything off
LeftEnable = 0;
RightEnable = 0;

TCCR3A = BV(WGM31);  /* set timer/counter 3 to fast PWM mode 6 */
TCCR3A |= BV(COM3A1) | BV(COM3B1); /* Clear OCnA/OCnB/OCnC on compare
match when up-counting. */
TCCR3B = BV(CS31) | BV(WGM32) ; /* prescale: 8 @ 16 MHz, 10 bit PWM
overflows @ 1953 HZ */ 

// turn everything off
OCR3A= 0;
OCR3B= 0;

DDRE |= BV(PORTE3)|BV(PORTE4); /* enable PWM outputs */

// set these as output (pins 0 through 3 on port A)
DDRA |= BV(PORTA0) | BV(PORTA1) | BV(PORTA2) | BV(PORTA3) ;



}


To to forward I set the pins for direction and then this code sets the
speed to close to 100%

OCR3A = 500;
OCR3B = 500;

-- turns the motor off
OCR3A = 500;
OCR3B = 500;



There are other aspects about pwm control of motor that depend on the
hbridge

-----Original Message-----
From: Luke.Wei [mailto:mrddt4todie@yahoo.com.tw] 
Sent: Thursday, February 17, 2005 10:32 PM
To: AVR-Chat@yahoogroups.com
Subject: [AVR-Chat] Have someone can share example ?




Dear all

       Have someone can share example about PWM or step motor 
controller . thanks

       Luke





 
Yahoo! Groups Links

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.