AVR-Chat

--- In AVR-Chat@yahoogroups.com, Bruce Parham <obparham@j...> wrote:
> 
> Well I can and did. If you look at the AVR component and count the 
pins, you'll see
> that pins 17, 18, 38 and 39 are missing. Atmel seems to thing 
these pins should be 
> connected to Vcc and GND. It might help...

..it might help Javier (and others) to use the OrCAD (and Protel) 
libs from my homepage (http://www.geocities.com/_wsw_ follow the 
link to electronics/AVR there). I usually define the power pins as 
passive pins in order to be able to connect them to various power 
nets (digital/analog power etc.).

HTH,
Stefan