Yahoo Groups archive

AVR-Chat

Index last updated: 2026-04-28 22:41 UTC

Message

Re: [AVR-Chat] 7805 power supply

2004-10-19 by jay marante

i found the UCC383-5 from TI. it is pin compatible with the 7805. input voltage from 5.5 to 9 V with 3 amps max output.

Zack Widup <w9sz@prairienet.org> wrote:I got a dozen or so LT1074/LT1076's very cheap at a hamfest. They are 5-pin TO-220 devices.  These are great for a switching supply that puts out 5 volts for 10 to 40 volts in. With a split inductor circuit you can get 10 amps out at 5 volts with the 1074.  I usually only need a couple amps at most for a circuit, so the straight inductor circuit Linear has in their data sheet works well enough for me.
 
Zack
----- Original Message ----- 
From: Robert Adsett 
To: AVR-Chat@yahoogroups.com 
Sent: Monday, October 18, 2004 10:38 PM
Subject: Re: [AVR-Chat] 7805 power supply


At 12:37 AM 9/25/04 -0400, you wrote:
<snip>

>As far as a switching replacement you might take a look at these
>
>http://focus.ti.com/lit/ds/symlink/pt78st105.pdf
>
>I've not used them so I can't say how good they are.  You would need to
>check their thermal performance but a quick glance looks good.  I'm not
>100% sure they fit in a to-220 outline but if I am remembering correctly
>the rep that pointed them out to me once upon a time said they either did
>or were close.

A followup to an old post on the assumption there are a few people here who 
may be interested.  I ran across this switching replacement for a 7805 
while looking for shunts and associated panel meters.

http://store.datel.com/cgi-bin/datel.storefront/417488ce057cc09c271d0c9f89420719/UserTemplate/1?BodyContent=newdpm#dpm1

I particularly like the wording "Prices start at $4.95 for huge quantities".

Robert

" 'Freedom' has no meaning of itself.  There are always restrictions,
be they legal, genetic, or physical.  If you don't believe me, try to
chew a radio signal. "

                         Kelvin Throop, III



Yahoo! Groups SponsorADVERTISEMENT


---------------------------------
Yahoo! Groups Links

   To visit your group on the web, go to:
http://groups.yahoo.com/group/AVR-Chat/
  
   To unsubscribe from this group, send an email to:
AVR-Chat-unsubscribe@yahoogroups.com
  
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



		
---------------------------------
Do you Yahoo!?
vote.yahoo.com - Register online to vote today!

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.